Question about 1990 Mazda RX-7

1 Answer

90 rx7 turns over but will not start

13b 90model rx7 will not start, it will turn over. No fire from the plugs?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

It could be many things, no fire or no fuel, replaceing your spark plugs is most likely the leats expensive thing to do and if that doesnt work then there is most likley a problem with the fuel either too much or not enough. rx7s are notorious for flooding and it doesnt take much.

Posted on Feb 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need diagram for which spark plug wire go where on


follow this link to a RX 7 forum , will help as not usual engine configuration etc
firing order for 87 13b RX7Club com

Oct 18, 2014 | Cars & Trucks

1 Answer

13B Rotary Firing order diagram


The 1984 Mazda RX7 has a Rotary Engine.
For the 1.1L

Firng Order:
1-2 (thats all folks!)
Cylinders:
__________
'......2.......'
'......1.......'
....[FAN]

Distributor:
.............(+)-screw
......2
1..........2
......1
(+)-screw

Aug 09, 2010 | 1984 Mazda RX-7

1 Answer

I have a 1989 mazda rx7 convertible automatic with the 13b rotary engine and im going to swap the engine and tranny for the 13b turbo engine and manual tranny,and also have ecu.is it hard to swap and how.


its not hard at all. as long as your good with your hands. and know the basics of your rx7. other then that everything bolts in. you just need a turbo driveshaft for sure. or they sell a custom driveshaft on mazdatrix.com so you can keep your N/A differential.

Apr 18, 2010 | 1989 Mazda RX-7

2 Answers

1985 ignition timin on mazda rx7 13b


There are 2, the leading you turn the dist to line up the mark, then the trailing you move the trailing vac advance to line up the mark (about 10mm after the first mark. It usually never needs to be adjusted unless someone has messed with it. Its hard to describe without a diagram.

Mar 12, 2010 | 1985 Mazda RX-7

2 Answers

Ive got a 13b series 4 rx7 needs seals done


yes! its the best time! and only time since the engine will be apart.

Feb 19, 2010 | 1989 Mazda RX-7

1 Answer

How do i install a new starter motor on a 1982 mazda rx7 13b manual?


unhook battery cable. there are only 2 bolts holding the starter in. you will need 14mm wrench and 14mm and/ or 17mm sockets, I think 1 bolt will have a nut on the end as it goes through. after that the start will hang and the wires are easily taken off.

Sep 18, 2009 | 1983 Mazda RX-7

1 Answer

I need a site where i can download a mazda rx7 13b turbo repair manual for free


www.onlinefreeebooks.net/pdf.../mazda+rx7+repair+manual/

Jul 19, 2009 | 1993 Mazda RX-7

1 Answer

RX7 with 13b engine is hard to start, idles fine, dies on accel.


problem like this on garden tractor ,was weak coil ,-when engine at low manifold pressure[idle] spark could jump gap and fire cylinder ,higher pressure /under load-wouldn't fire...check color of spark -orange,yellow ,white spark=weak, blue spark is stronge,

Mar 22, 2009 | 1984 Mazda RX-7

1 Answer

1985 rx7 13b will not hold idle


A large rubber hose feeds air to the large block with "RE-EGI" cast into it. Between that intake hose and the RE-EGI block, called the dynamic chamber, is the throttle valve. You can adjust the idle speed by adjusting a screw in the top of the throttle valve to 800 rpm.

Feb 18, 2009 | 1985 Mazda RX-7

Not finding what you are looking for?
1990 Mazda RX-7 Logo

Related Topics:

642 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...