Question about 2000 Chrysler Concorde

2 Answers

2000 chrysler concorde how do I find and replace thermostate ?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The best way to find the thermostat is to follow the lower radiator hose back to the engine where it ties into the thermostat housing.
You have to remove the accessory drive belt for the generator, then lift the vehicle to work from underneath, then remove the generator bolts and set it aside. Then remove the hoses from the housing. Then remove the housing and the thermostat.
Clean the sealing surface. Install thermostat with bleed hole at 12:00 oclock position. Install housing and tighten bolts to 105 inch-pounds (about 9 foot-pounds).

Thanks for using FixYa - a FixYa rating is appreciated!!

Posted on Feb 18, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

Take upper radiator hose and follow that back to the engine and remove the bolts on each side of the housing and the thermostat is in there and you just pull it out and put the new one back in the same way

Posted on Feb 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know: Which cylinder is the 4th cylinder on the 6 cylider Chrysler 2.7L DOHC 24 Valve engine?


Check this diagram for...
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "U"
or
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "V"
or
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "R"

zjlimited_275.gif


Good luck (remember to rate and comment this answer).

Mar 28, 2011 | Chrysler Sebring Cars & Trucks

1 Answer

How do I replace the thermostat on a 2000 |Chrysler Concorde. Can't get the engine cover off


A HAYNES REPAIR MANUAL WILL BE HELPFUL.IT HAS PHOTOS AND INFORMATION TELLING YOU HOW TO REMOVE THE THERMOSTAT.

Mar 27, 2010 | 2000 Chrysler Concorde

1 Answer

I replaced my battery and now i need to reset my radio for a 2000 chrysler concorde. i need the radio code. thanks


Remove the radio from the dashboard and post the MODEL NUMBER and SERIAL NUMBER found on a label on the radio casing

Dec 27, 2009 | 2000 Chrysler Concorde

1 Answer

I have a 2001 chrysler concorde. the trouble codes


I RECOMMEND REPLACING THE OUTPUT SPEED SENSOR..ABOUT 40 BUCKS..WILL CAUSE THESE OTHER FAULT CODES AS WELL

Aug 30, 2009 | 2001 Chrysler Concorde

2 Answers

1996 chrysler concorde keeps overheating, there's enough coolant and oil. Fan is not working, but still overheats on freeway


Hi,
I always suspect and recommend replacing the thermostat... but also noticed you said your fan wasn't working. I would get this taken care of... it could also be your culprit.
Hope this helps... Good luck!

Jul 04, 2009 | 1996 Chrysler Concorde

1 Answer

I have a 2000 chrysler concorde that the engine light just popped on - the error codes are po302, po420, po340


P0302-cylinder #2 misfire detected
P0420- catalyst efficiency below threshold bank 1
P0340-No cam signal at PCM.
The Cam sensor most likely needs to be replaced first. Clear the codes after that and drive and see what comes back on.

May 29, 2009 | 2000 Chrysler Concorde

1 Answer

I have a 2000 chrysler concorde with possible


I would say thats for you to decide. You got to weight all your options, whats the1300.00 for replacement engine? Or what, if it was up to me i would most likely get a nother car but thats me, you got to do whats best for you and your situation.

Feb 25, 2009 | 2000 Chrysler Concorde

Not finding what you are looking for?
2000 Chrysler Concorde Logo

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...