Question about 2002 Ford F350 Super Duty DRW Reg. Cab

Open Question

How do i remove the front rotor on 2002 f350 4x4 dually?

I have the adaptor removed, but the rotor will not move.

Posted by on

5 Suggested Answers

  • 625 Answers

SOURCE: 2002 Ford Escort front brake rotors - removal

the first thing i will recomend you, is ti buy the new rotors first,
sisnce you did not mention if you allready have the new ones
and see if they are slide out type rotorss or one piece rotor assy
with the lugn nuts, sometimes they just slide out but sometimes you need to remove the center big nut in order to remove them.

Posted on Jun 22, 2008

  • 1 Answer

SOURCE: removing rear rotors on 2002 dodge dually.

Remove the axle and outer wheel bearing and pull the assembly off the truck. The rotor is bolted on from the rear.

Posted on Apr 20, 2009

Healeyman
  • 1198 Answers

SOURCE: front wheel bearing removal on 2006 F350 touchtone 4X4

Get a good repair manual. Front ends on 4X4s require proper care.

Posted on Apr 25, 2009

VWdan
  • 114 Answers

SOURCE: I'm having trouble getting rear

snap ring? Its a full floater! Take bolts off end of shaft pull shaft out,remove bearing lock nut (the correct socket works so sweet!), pull hub and rotor off, The studs hold the rotor to hub or some have external torx bolts that hold it to the hub.Remove those and you may need to tap hard with a hammer to separate. Where is that snap ring?
You will need new seals,and studs are a good idea,how do those parking brake shoes look?

Posted on Apr 25, 2009

fknstart
  • 404 Answers

SOURCE: cannot remove front rotors

you may have too heat them up with a blow torch be carefull of brake lines then hit with hammer in a circular motion

Posted on Jun 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93 gmc 3500 ext cab 4wd dually how to change front brake rotors


Exactly what is the problem your having ?

I have looked on You Tube Video & don't see
any issues you should have --explain the problem

Just removing the caliper & rotor or the wheel hub

Feb 16, 2013 | Cars & Trucks

1 Answer

2006 dodge ram 3500 dually 4x4 front rotor....can I remove rotor without removing axle nut?


I beleve all heavy duty trucks would have a axle nut to adjust/hold it in.

Aug 24, 2011 | Dodge Ram 3500 Cars & Trucks

1 Answer

Need a diagram to replace a front wheel bearing on a 2002 Hyundai Accent


can't remove front rotor it has stuck to thebub or something how do i re move it

Dec 30, 2010 | 2002 Hyundai Accent

2 Answers

How to remove the rear brake rotor on a 2006 dodge ram 3500 dually


Single rear wheel - Remove both caliper bolts.. remove caliper and pads.. remove rotor.. they are usually rusted on pretty good.

Rear Dually- the rear rotors are mounted with the hub assembly.. you must first remove the rear axles.. then remove nut holding load on bearings.. then the rotor and hub assembly will come off as one unit.. removed rotor from hub..

Mar 23, 2010 | 2006 Dodge Ram 3500 Truck

1 Answer

Changing front rotors 2002 astro


YOU HAVE TO SAFELY RAISE SUPPORT VAN ON JACK STANDS.REMOVE BRAKE CALIPER AND BRAKE PADS DONT DISCONNECT BRAKE LINE.THEN MOVE DUST CAP OR GREASE CAP.REMOVE COTTER PIN SPINDLE NUT AND WASHER.THEN THE ROTOR NUT.YOU NEED A HAYNES OR CHILTON MANUAL.BECAUSE YOU HAVE TO ADJUST WHEEL BEARING WHEN YOU REPLACE ROTORS.

Feb 01, 2010 | 2002 Chevrolet Astro

1 Answer

I need a diagram on front hub and brake assembly for 1999 dodge 1 ton dually 2 wheel drive. the front brake rotor is warped i need to replace it


8–Stud Rotor
  1. Raise and support the vehicle.
  2. Remove the wheel.
  3. Remove the hub extension.
  4. Remove the brake caliper assembly.
  5. Remove the axle nut cotter pin. Remove the axle nut.
  6. Disconnect the ABS wheel speed sensor wire from under the hood. Remove the sensor wire from the frame and steering knuckle, if equipped.
  7. Back off the hub/bearing mounting bolts 1/4 inch each. Then tap the bolts with a hammer to loosen the hub/bearing mounting bolts.
  8. Remove the bolts and remove the hub/bearing assembly.

Sep 16, 2009 | 2000 Dodge Ram 3500

1 Answer

Replacing front rotors on a 2002 jeep liberty...removing the piece that prevents the rotor from being removed


lift and suport frame of vehicle, place safety stands under frame to prevent vehicle from falling, take tire off, remove fastners holding caliper to steering knuckle, remove caliper mount by removing fasteners at steering knuckle, slide rotor off.

Jul 06, 2009 | 2002 Jeep Liberty

1 Answer

Removing rear rotors on 2002 dodge dually.


Remove the axle and outer wheel bearing and pull the assembly off the truck. The rotor is bolted on from the rear.

Apr 17, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

2002 Ford Escort front brake rotors - removal


the first thing i will recomend you, is ti buy the new rotors first,
sisnce you did not mention if you allready have the new ones
and see if they are slide out type rotorss or one piece rotor assy
with the lugn nuts, sometimes they just slide out but sometimes you need to remove the center big nut in order to remove them.

Jun 22, 2008 | 2002 Ford Escort

Not finding what you are looking for?
2002 Ford F350 Super Duty DRW Reg. Cab Logo

Related Topics:

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...