No power to the ignition but power to headlights is good
SOURCE: How to remove ignition cylinder from Toyota Camry 1993
Here are step-by-step instructions for the removal and re-installation of your ignition cylinder on your Toyota. Hope this sheds some light on the subject and solves your problem. Have a great day!
CAUTIONSome
models covered by this guidemay be equipped with a Supplemental
Restraint System (SRS), which uses an air bag. Whenever working near
any of the SRS components, such as the impact sensors, the air bag
module, steering column and instrument panel, disable the SRS, as
described in .
On some vehicles, it may be necessary to remove the steering wheel and combination switch first.
To install:
SOURCE: 1991 toyota camry will not start
Glad to hear that you are up and running! Please feel free to call upon me at anytime. The graciousness of a FixYa rating for my assistance would be greatly appreciated.
SOURCE: power steering belt on 1991 toyota camry
Locate the idler pulley. Loosen the nut in the center of the idler pulley. Then loosen the bolt that protrudes from the back of the pulley. This will let the belt go slack.
SOURCE: Headlights turn on by themselves when vehicle is parked.
Do you have auto lights when it gets dark out? When they come on is it in a parking garage or home garage where its dark If so chances are your switch/relay unit is bad. (or do they come on in daylight too)?
SOURCE: 2003 toyota camry won't start. Had battery tested,
Could be the starter motor, bad battery connection, starter motor solenoid, faulty ignition switch, siezed up engine.
Turn the head lights on and try to crank the engine, if you hear a click and the lights dim, it is a bad battery or a loose battery lead. If you hear a click and lights don't dim, bad starter. If you don't hear a click, it is the starter solenoid. If nothing at all, bad ignition switch.
242 views
Usually answered in minutes!
What do you mean by no power to ignition. Give me a step-by-step. Begin with: "I get into car" I then..., and then..., and I then perceive:?,
no pwer @ all I thought it's was the battery but chaged it and still no power
×