Question about 2001 Ford Windstar

1 Answer

I want to replace my PCVs n my 2000 Windstar. The parts package contains not one, but 4 different PCVs. Where do I look?

Posted by on

  • vss6 Feb 19, 2009

    I opened the package and I realized there was one PVC and 3 hose adapters- and only one will fit. Thanks for replying so quickly!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 296 Answers

There shouldnt be but one PCV it would be located eather on the valve cover or on the head. It has one hose or tube to it, and the unit will pull right out of a rubber ghromet.

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace transmision on 2000 ford windstar


Auto Parts Warehouse has a transmission assembly for a 2000 Ford Windstar available for $1,509.72. Another website has a rebuilt one with a 6 month warranty for $1118.88. It is best to check around.

Nov 14, 2012 | 2000 Ford Windstar

1 Answer

Windstar 2000, speedometer, odometer, gas, temp, indicators wildly go back and forth, stick at one extreme or the other, if speedometer sticks below 0, can't put into park. master cylinder switch...


same thing happens with my 2000 windstar, if you could take the instrument panel out, and unscrew the the back of the instrument panel that covers the circuit board and clean the circuit with a brush, pure bristle brush is best 'coz they're stiff and gets all the dust that accumulated on the circuit board. some dust particles contain conductive material and shorts the circuit board and cause the trouble you have, ever since i did that no more trouble. and to those who are planning of replacing your instrument panel should do this first. it'll save you money. always change your "outside air" filter

Sep 21, 2011 | 1999 Ford Windstar

1 Answer

Hi my horn does not work in my 2000 ford windstar but i dont know where i should look to replace it can you please help me is it in the van or under the hood and in what position thank you very much


First check the fuse. On your 2000 it is Fuse #4 on the fusebox in the engine compartment. The horn is located inside the fender behind the left headlight. You get at it by removing 5 phillips screws. The bottom part of the plastic fender liner, and reaching in. A 1/2 socket takes off the bracket, and the wire is connected by a spade lug. It may have come loose.

Apr 04, 2011 | 2000 Ford Windstar

1 Answer

I do not know wat kind of altenator to put on my 2001 windstar


Go to the Auto Parts store, tell them you have a 2001 Winstar and you need an alternator for the vehicle. They will look it up and if there are optional units they will be identified by what optional equipment you have installed. In most cases there are not. In some cases it is different if you have a second AC in the rear or a Power accessories package but the Auto Parts store computer can will tell you which one is best suited for your vehicle.

Sep 28, 2010 | 2001 Ford Windstar

1 Answer

Replacing belt on 2000 ford wingstar(diagram) 3.8litre engine


6a0c58e.gif


Item Part Number Description 1 8620 Drive belt 2 3D673 Power steering pump pulley 3 8A528 Water pump pulley 4 10300 Generator pulley 5 6C348 Idler pulley 6 2E884 A/C clutch pulley 7 6B321 Crankshaft vibration damper pulley 8 6B209 Drive belt tensioner

Aug 12, 2010 | 2000 Ford Windstar

1 Answer

I think the spark plug wires may be mied up on my


2000 Ford Windstar 3.0 liter V-6 VIN "U"

a517a3d.gif


2000 Ford Windstar 3.8 liter V-6 VIN "4"

31131d4.gif

Hope this help.

May 05, 2010 | 2000 Ford Windstar

1 Answer

Replace windshield washer resevoir on a 2000 ford windstar


YOU CAN GO TO AUTO ZONE OR ADVANCE AUTO PARTS .BUY A HAYNES MANUAL FOR 2000 FORD WINDSTAR.IT WILL SHOW AND TELL YOU HOW TO FIX WINDSHIELD WASHER RESERVOIR.

Nov 11, 2009 | 2000 Ford Windstar

1 Answer

Power Steering Pump


you need an 18mm crows foot wrench 12" 3/8 extention N ratchet N 10mm socket. remove the belt, use crows foot to remove the pressure line, remove other tubes, remove 4 10mm bolts and pluck the pump out, go to autozone or some large chain auto parts store and buy a pully remover/installer use it then bring it back,( they have a loaner program) without the puller you will never get the pully off.

Apr 11, 2009 | 2000 Ford Windstar

2 Answers

02 Windstar Mirror replacment.


You may have the improped replacement part . I would double check to be sure.

Dec 07, 2008 | 2001 Ford Windstar

Not finding what you are looking for?
2001 Ford Windstar Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...