Question about 1990 Mercury Topaz

1 Answer

Power windows don't work on 1990 mercury topaz

All

Posted by on

  • shangri_la_3 Feb 17, 2009

    thanks for the info

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 202 Answers

First check all fuses.
Check the switch on the door by making sure there is power to the switch and test the switch controls by back probing the wires and activating the switch. sometimes its trial and error.
If that is all good, then the window motor is at fault and needs replacing and the door panel has to come apart to replace motor.

If you think its a motor try pounding the lower end of the door while trying to roll window up with the switch. this may give the motor a second life but it may be short.

Posted on Feb 17, 2009

6 Suggested Answers

  • 1 Answer

SOURCE: i cant find the transmission fluid dipstick in a

Right frontof the car, kinda buried in between the engine. You'll need a long funnel to replace any transmission fluids!

Posted on Apr 28, 2009

co7196
  • 3433 Answers

SOURCE: aparently there are 2 fuse boexes in a 1990

The secret fuse box is under the hood on the driver side fender wall.Be careful there are spies everywhere trying to find this piece of high tech fuse concealment. :-)

Posted on Jun 23, 2009

c17hydro
  • 2984 Answers

SOURCE: FUZE BOX DIAGRAM FOR 1990 MERCURY TOPAZ

Replacement

  1. Access the fuse panel from the left of the steering column.
  2. Locate the blown fuse and pull out. DO NOT TWIST.
  3. Take note of the ampre number written on the top of the fuse. To install:
  4. Push a new fuse of the same ampre into the receptacle, making sure the contact is being made on both sides of the fuse.
LOCATIONS Headlights and Highbeam Indicator
  • One 18 amp circuit breaker (22 amp in 1987 vehicles) incorporated in the lighting switch.
Front and Rear Marker, Side Parking, Rear and License Lamps
  • One 15 amp circuit breaker incorporated in the lighting switch.
Windshield Wiper
  • One 4 1⁄2 amp circuit breaker located in the windshield wiper switch.
Power Windows
  • Two 20 amp circuit breakers located in the starter relay and the fuse block.
Power Seats and Power Door Locks
  • One 20 amp circuit breaker located in the fuse block.
Hazard Flasher REMOVAL & INSTALLATION NOTE: The hazard warning flasher is located on the rear side of the fuse panel.
  1. Locate the hazard flasher in the fuse panel.
  2. Pull the flasher out. DO NOT TWIST. To install:
  3. Push new flasher into place making sure a good contact is made with both terminals.
  4. Test flasher to make sure they function properly.
Various Relays LOCATION Cooling Fan Controller
  • Located behind the left side of the instrument panel.
Cooling Fan Controller Module
  • Located behind the right side of the instrument panel.
Cooling Fan Relay
  • Located in the air conditioning cooling fan control module.
Electronic Control Assembly
  • Located under the left side of the instrument panel.
Electronic Engine Control Power Relay
  • Located behind the glove box on the right side of the instrument panel.
Fuel Pump Relay
  • Located behind the glove box.
Horn Relay
  • Located in the fuse block.
Fig. 1: Main fuse box located on driver's side to the left of the steering wheel, above the brake pedal

e55ee77.jpg
This is the best info I could find....I hope this helps ya!

Posted on Jul 23, 2009

Ainur-666
  • 44 Answers

SOURCE: power windows don't work

I have the very same car. Get the fuses replaced, or show your car to a technition who can get the circuit board checked.
In my case, I replaced the motors on the windows, you can get them cheap if it's second-hand. Windows are working as good as new now!
=)

Posted on Aug 07, 2009

cmahanna
  • 27 Answers

SOURCE: 1990 mercury topaz

In the trunk

Posted on Aug 10, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the blend door located on a 90 mercury topaz


Greetings, I read your question and I think Reliable-Store can help you in this. Here's the site link.
Best Manuals

Jun 06, 2015 | 1990 Mercury Topaz

1 Answer

Changing the front wheel bearing on a 92 mercury topaz


replace front right wheel erings 93 mercury topaz

Mar 23, 2012 | 1990 Mercury Topaz

1 Answer

Where do you find the relay for the cooling fan on a 1990 mercury topaz


HI. This relay is very hard to locate. It is located just to the left of the battery ,as you are looking face down at it. It will be tucked up against the left radiator support, near the headlight. look in between the battery and the radiator and you should see it there.



Jul 04, 2010 | 1990 Mercury Topaz

1 Answer

Spark plug gap settings for 1990 topaz 2.3L (x)


there is an emission label some where under the hood, you can also get it at the parts store that you buy spark plugs from.

Mar 05, 2010 | 1990 Mercury Topaz

1 Answer

Aparently there are 2 fuse boexes in a 1990 mercury topaz i need to know where they BOTH are


The secret fuse box is under the hood on the driver side fender wall.Be careful there are spies everywhere trying to find this piece of high tech fuse concealment. :-)

Jun 23, 2009 | 1990 Mercury Topaz

1 Answer

I cant find the transmission fluid dipstick in a 1990 mercury topaz


Right frontof the car, kinda buried in between the engine. You'll need a long funnel to replace any transmission fluids!

Apr 12, 2009 | 1990 Mercury Topaz

1 Answer

I took off my plug wires on my distributor cap on my 1990 mercury topaz and i dont know the firing order to reconnect them


Here you are;

The firing order is 1-3-4-2
1
Front 2
of 3
vehicle 4

The distributor rotates clockwise.
Please remember to rate this solution.

Dec 26, 2008 | 1990 Mercury Topaz

1 Answer

Front bumper


ford tempo is the same car inside and out the differance is the name, all body parts will be the same in that year possibly from 1990 -1993

Sep 29, 2008 | 1990 Mercury Topaz

Not finding what you are looking for?
1990 Mercury Topaz Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...