Question about 1996 Ford Explorer

1 Answer

Fuelpump needs replaced what are the steps to change the fuelpump how do you change the fuelpump?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

First of all you will need to put the car on jack stands and secure the rear of the vehicle so it does not roll disconnect the negative side the battery you will need a floor jack to lower the fuel tank down be sure to put a small board on top of the jack so you do not put a hole in the tank also get some WD40 or something similar to spray on the bolts to help loosen them once you get the tank down unplug the wires on top of the tank and be careful not to break them and then you have to get that center ring to move around and once it is free your fuel pump will come out

Posted on Feb 18, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to change fuelpump in 1991 buick lesaber

Drop the fuel tank & take pump
out the top

Watch some video on it

Oct 07, 2014 | Cars & Trucks

1 Answer

Replaced fuelpump filter fuseablelink for v6 91 rodeo still no fuel what do i need to check next

you have a bad fuel pressure regulator it is located on the fuel rail

Nov 03, 2012 | 1991 Isuzu Trooper

1 Answer

Gmc yukon turns but will not start dont hear the fuel pump on in the fuel tank

With ignition key on run, use test light to verify you have positive & ground to fuelpump. No power (positive) check fuelpump fuse. No ground check fuelpump relay. If both positive & ground fuelpump needs to be replaced.

Jan 17, 2011 | 1993 GMC Yukon

1 Answer

This is the 3rd fuel pump on 2000blazer ,changed the filter, the press. was 56 to 60lbs. the prob, now is it starts perfect but if i step on accelarator it just flattens right out. if i let idle for about...

i work at a local shop and have ran into this problem with the( air text) brand ...not that i am a brand snob or anything but we had to go with the( delphi) brand which is more money but it fixed the problem on 2 s-10 pickups....hope it helps

Nov 22, 2010 | 2000 Chevrolet Blazer

1 Answer

Po232 Located on a 1997 Ford Windstar

Fuelpump secondary circuit high. First try changing fuel filter, it is probably plugged which is over working your fuelpump. If filter was or is changed & problem persists will most likely need to change fuelpump.

Sep 06, 2010 | 1997 Ford Windstar

1 Answer

How to replace a fuel pump 93 mit 3000

This link should should give you everything you need, step by step...

Please let me know if this had assited you,


May 25, 2010 | 1993 Mitsubishi 3000GT

2 Answers

I need to change the fule filter in my 2002 jeep cherokee

yes, its in the tank,and yes you must drop tank to replace,now this filter is good until the life of the fuelpump, theres no need to replace it unless your replace the pump,or if someone put something in the tank, ive worked on many and never replaced that filter, the only time ive replaced it is if i was doing the fuelpump. hope this helps.

Apr 16, 2010 | 2002 Jeep Grand Cherokee

1 Answer

How do you change the fuel filter to 02 Dodge Intrepid?

you do not, theres no fuel filter to change, theres a filter screen inside the tank on fuelpump, this only gets replaced when fuelpump goes bad and needs replacing,ive never changed a in tank screen unless i was doinng a fuelpump, hope this helps.

Feb 18, 2010 | 2002 Dodge Intrepid

1 Answer

How do i change a fuelpump in my 1997 Buick

Most modern cars have the fuel pump inside the gas tank, so it is not at all a do-it-yourself job. However, you could go to the library or auto parts store and read the Chilton's manual to make sure.

Sep 01, 2009 | 1997 Buick Century

1 Answer

Change fuelpump

its an electronic pump and its located in the gas tank you'll have to drop the tank to replace

Jan 11, 2009 | 2001 Hyundai Accent

Not finding what you are looking for?
1996 Ford Explorer Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5610 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides