Question about 1997 Dodge Caravan
If you are looking for the fuse box diagrams or any other diagrams for your Ram, check promanuals.net for a factory service manual for around 20 bucks or so. It's an invaluable tool for my Ram 2500.
Posted on Sep 26, 2009
Remove the cover plate on the passenger side of the heater box, 3-4 screws.
Unplug the motor assembly, remove 3-4 more screws that hold the motor in place and pull it down from its position. Get an aftermarket motor and installed it in the original housing with the original squirrel cage.
Installation is the reverse of removal.
Posted on Nov 23, 2009
The fuse box is located under the hood. There is component map printed on the inside of the cover. This tells you on your model where the fuse or relay is located
Posted on Jan 19, 2010
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
Tips for a great answer:
Dec 19, 2015 | Dodge Cars & Trucks
Jul 31, 2014 | 1997 Dodge Grand Caravan
Nov 14, 2012 | Cars & Trucks
Aug 14, 2012 | 1998 Dodge Grand Caravan
May 12, 2011 | 2002 Dodge Caravan
Apr 08, 2010 | 1999 Dodge Grand Caravan
Oct 26, 2009 | 1997 Dodge Grand Caravan
733 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: