An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: f 250 ford
Before you replace the ECU check to see that the fuel pump relay is working. It will be on the drivers side under the hood located just above the fenderwell. It should be mounted on a plastic piece with two other relays beside it. This relay is only about $ 16.00.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Why do you think there is fuel in the oil? Does it smell like it? Or is the dipstick level climbing? Tell us more about the problem and what you have already tried/done. When was the car last fully serviced? Poor maintenance is no excuse for poor running.
It's located in the back of the fender on left front. Remove rear of fender liner (towards firewall), you'll see a large wiring connector with a small bolt head in the middle. Remove connector and two screws, one on either side of the connector, and slide out computer.
Majority problem on the ECU is the leaky electrolytic capacitors.
If you has the time to do soldering then you can fix the brain box for under $15 vs $120+ for a use one.
Just open the cover and look for damage (over-heated + leaked) capacitors.
i believe you are hearing the starter turn over but the bendix in the starter is probably bad which is what makes the starter engage the flexplate (flywheel) so unfortunately whoever told you to replace the starter is right, but lucky for you ford trucks have some of the easiest starters to acess
1990 Accord didn't come with a factory alarm option. You must have an aftermarket alarm installed and the fuse for that alarm will be on the red wire, very close to the actual alarm brainbox. That brainbox should be located under the dashboard somewhere, normally on the drivers side, but it all depends on where the installer decided to put it. :)