An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: I HAVE A PROBLEM ENGAGEING GEARS ON MY RENAULT TRAFIC
Sounds like a new clutch is needed,pressure plate weak ,oil on clutch causing it to stick,thrust bearing collapsing as its plastic ,spigot shaft rusty causing clutch plate to stick ,evan more causes but i could write all night ,check oil in gearbox
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Isolate the problem. Sound like clutch is stuck and not disengaging. Engine off put in gear and rock the vehicle,, with help from a friend press clutch pedal while in gear and have friend push, you will know if the tranny is ok and clutch is stuck. Now check the clutch, slave etc for engagment and disengagment / Clutch linkage- movement/travel may need adjustment or you have something wrong in the reassembly..
IF all other gears work as designed then the problem will not be the clutch but in the gear box. The only thing that you would have removed in the gear box is the gear lever or the gear level turret on top of the box. recheck this area to ensure that you have got the lever in the selector rails correctly and that the reverse rail is not out of line with the cross section of the others.. Use a big screw driver to pull it out of gear to align across the slot.
After fitting the cables! You need to adjust the GATE cable as each gearbox has slightly different wear... One cable selects the gears.. The other is responsible for the smooth gear selection! Sounds like your out of line mate! Theres an adjustable thread on the GATE cable! Keep adjusting til it selects smoothly! JOB DONE SAAAAAAN!! :-)
had exactly the same problem with mine, its in my mates garage as we speak. he had to take the engine out open the gear box and check the bearings. All the bearings were worn !!!! had to buy a wole bearing kit, £170 . plus labour, lot cheaper than getting it reconditioned by specialists!!! they wanted £1000 for doing exactly what my mate has done for me. Hope this helps you!!!!!!!!!!!!!!!
I am assuming that it is auto. trans??Check trans. fluid level and look under car to make sure linkage is connected and moving. Also when did it stop working ? all of a sudden or after sitting for long time? or over time?But quick guess, If all is good most likely torque converter went out. Then tranny issue, sorry no easy fix!!!
maybe has a broken linkage or the bolt came lose.
Check if you can engage hall the gears pushing the linkage by hand,engine ranning and same one pressing the clutch!that way you can have same idea wath is wrong?!