Question about 1987 Chevrolet S-10 Pickup

2 Answers

New fuel pump wont work either

My s-10 pickup quit and is not getting fuel i replaceed the fuel pump and still no fuel is there something electrical i should look at and how can i test the pump it is a 1987 4x4 2.8 s-10 pickup

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,118 Answers

Look under hood some ware around left fender well there should be a red wire with a plug on it that looks like it should be pluged to something but its not, that wire goes directly to fuel pump, run a hot lead to that and see if pump runs. Also chk. grounds and hot leads and all fuses and the relay. If you can't find the wire, and your sure fuses and relay and connections are functioning, you may have to run your own hot wire to pump to see if it will run. Be aware its possible to have gotten a defective pump.

Posted on Feb 17, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check the fuse to the ECM if it is good listen when you turn the key onj for the relay to click..from there check your Oil sending unit as the pump will not work with out the oil pressure up to about 4 lbs.. created while you crank the engine...

Posted on May 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It wont start after replacing fuel pump


GAS AND ELECTRICITY ... BAD COMBO. . GOTTA MECH? ANY ADVICE I COULD GIVE WOULD BE DANGEROUS AT BEST. MOBILE MECHANIC MAY BE CHEAPEST. COVER THE LEGALITIES ESTIMATE, ETC. CHEAP DONT ALWAYS MEAN BEST. GOOD LUCK

May 30, 2014 | 1999 Chevrolet S-10 Pickup

1 Answer

1997 chevy s-10 6cyl won't start with new battery. Engine turns, but it won't crank.


crank no start? I would check for fuel pressure on these models, the fuel pump module is quite often repalced. Then I would check ignition cap and rotor. Cap get white with corrosion and rotor green.

Nov 29, 2010 | 1997 Chevrolet S-10 Pickup

2 Answers

1995 nissan pickup truck fuel problem


Fuel injected or carb? Make sure fuel line itself is clear. Some pumps are designed to self regulate (carb systems) some continually pump and a psi regulator sends back the excess fuel back to the tank (fuel inj systems) If the line is obstructed then pump can't deliver fuel fulltime.

If you think pump is not on consistent, try running a dedicated wire through a switch directly to the pump. If it works then you are looking for an electrical fault going to pump. Good luck.

Mar 10, 2010 | 1995 Nissan Pickup

1 Answer

My 1991 chevy 4.3 s-10 pickup wont start or stay running


check the fuel preasure regulator, using a vacuum pump check the unit and see if it holds vacuum if not replace unit

Sep 27, 2009 | 1991 Chevrolet S-10

1 Answer

On cold days the engine quits, after driving 1 mile


Distributor Ignition Pickup may be defective, these are sensitive to temp changes, they will cause a loss of spark..

Dec 17, 2008 | 1987 Jeep Wrangler

2 Answers

My s-10 will not pump any fuel


Check on top of the tank and make sure there are no kinks in the hoses leading off the pump. Also I have run into situations where the new fuel pump simply died due to faulty assembly at the factory.

Jul 31, 2008 | 1991 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...