Question about 2000 Hyundai Elantra

2 Answers

Clutch Sometimes Slipping in 4th and 5th gears!

2000 Hyundai Elantra GLS
Clutch Slipping in 4th and 5th gear!
Also Clutch Pedal Vibrates when slightly depressed!
Is the clutch adjustable on this model and if so how do I do it?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 286 Answers

Hi Jackiaria

Unfortunately you have a hydraulic clutch, which is self adjusting on your car.

The problem you are experiencing is the excessive wear to your clutch, or oil contamination on the clutch plate.

Both these problems can only be fully diagnosed once the gearbox is removed and the clutch is inspected.
There is also a possibility of excessive wear, or scoring, on the flywheel surface, the longer you drive the vehicle with a slipping clutch, possibly requiring the flywheel to be skimmed.

Shop around for a best price, and a trustworthy garage !

Good Luck !

A FixYa rating would be Nice....Thanks.....John.

Posted on Feb 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I had a problem with premature clutch wear on my 2000 Hyundai Elantra GLS. I continued to have a problem with Clutch Slipping in 4th and 5th gear even after the clutch and slave cylinder were replaced. The shop tried adjustment and modifying the slave cylinder. Nothing worked until the master cylinder was replaced.

Posted on Dec 02, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Elantra GLS with PO 732 and PO 734 codes. Any hope of a repair without a complete tranny rebuild?


2nd and 4th gear ratio codes. No matter the cause, the transmission has to be pulled. Low end at a garage is $1000, top end $2500+.

Mar 05, 2015 | 2000 Hyundai Elantra GLS

1 Answer

I have a 2000 hundai accent and when i shift into 4th gear it pops back out again


The problem is inside the box, could be a sliding sleeve and gear

Jun 25, 2012 | 2000 Hyundai Accent

1 Answer

Clutch slipping in all gears


sounds like if your talking about a manual most likely needs a clutch if your pedal is fully releasing

Dec 09, 2011 | 2000 Hyundai Elantra

1 Answer

My 2000 hyundai elantra is automatic it has a code p0734. which the mechanic explained me that i have to get the speen sensor replace and get new clutch because the 4 gear ratio is bad. pls advice what 2...


P0734=A/T 4th gear incorrect ratio. This has nothing to do with the speed sensor. If the speed sensor was faulty, it would also set OTHER gear incorrect ratio codes. My experience tells me the 4th gear incorrect ration indicates the torque converter clutch (TCC) is slipping and nothing more. Unless there was a speed sensor DTC (Diagnostic Trouble Code), the sensor is not the issue (yet). The fact P0734 was set (trust the computer), the TCC is slipping (out of range). Question: Maintenance history may indicate the wrong transmission fluid may have been introduced. Hyundai's Transmission fluid is strictly SPIII... there is no substitute. The incorrect fluid will cause 4th gear slippage. Now, having said that, it doesn't mean the 4th gear (lock-up) clutch isn't worn out. Have a qualified/certified Hyundai Service Technician properly diagnose this issue.

Sep 08, 2011 | 2000 Hyundai Elantra

1 Answer

2000 Hyndia Elantra, recently when i change gears 3rd and 4th the car will be going but if i push the gas to accelarte the rpms go up but the car dosnt speed up. if i accelatre slowly it is fine.


your clutch is more than a little worn out and needs replaced, it is slipping. in time the slipping will also be in the lower gears and any time a slight hill is encountered.

May 16, 2011 | Hyundai Elantra Cars & Trucks

2 Answers

Just bought a 2004 Elantra (93000 miles) with 5 speed tranny. With the hood up and my daughter behind the wheel I noticed a rattling sound (in neutral) coming from the clutch/transmission area when the...


I would be checking the throwout bearing. But, if the clutch isn't slipping, maybe leave it for now?

If you put it in 5th gear, let out the clutch with handbrake applied and it stalls--the clutch isn't slipping for sure.

Jan 31, 2011 | 2004 Hyundai Elantra

1 Answer

Stick shift


Hi:
The shift pattern is pretty much the same on all 5 speed cars. The top row is the odd numbers, 1-3-5
the bottom row is 2-4-Reverse. The center position is neutral

Here is the key: The shifter is slightly spring-loaded to the center position. If you hold in the clutch pedal and pull the shifter to neutral, and let go of it, it will automatically be lined up in the position, that if you pushed it forward , it would go to 3rd gear, and if you pulled it back, it would go into 4th gear.
This way, to start driving, you start out in neutral, grab the shifter lightly, and push it first to the left, then forward. This is first gear, where you start out. when you want to shift to second, push in the clutch, and keeping left pressure on the shifter, pull all the way back . Here is the easy part, 2nd to 3rd. When you are ready, push in the clutch, and just push the gear shift forward , till it hits neutral, and is spring loaded to the middle. Then you just push it straight forward to 3rd, then next shift, straight back to 4th.
Last gear, 5th: push forward to the neutral row, then Push to the right till it lines up ,and forward to the 5th gear. Reverse should only be shifted into from a dead stop. Find neutral, push the shifter all the way right, then pull back towards you. Hope this helps.
Practice a bunch in the driveway!

Apr 21, 2010 | 2001 Hyundai Elantra

2 Answers

Engine revs but car doesn't accelerate


Since you did not say what type of transmission you have i will suspect the clutch is slipping if it's a manual.
If it's an automatic, it could be several things. Low fluid level...clogged filter, fluid needs to be changed..transmission serviced...weak pump, bands/clutch packs worn...etc
Good luck..i hope this helps, please rate me a fixya.

Jul 29, 2009 | Hyundai Motor 2002 Elantra

2 Answers

2000 Hyundai Elantra Transmission problem


I don't know if I can help but as an owner of a Hyundai Elantra 2000 GLS with 205,000 miles and the original clutch and transmission I'll try and help!

I always start with the lowest cost solution first and avoid mechanics as much as possible!

Have you checked the trans fluid?
It should be changed every 30,000 miles!
Sometimes a Lucas Trans Fluid will cure - fix slippage!

Have you checked for a clutch adjustmet!
An adjustment can cure - fix slippage!

Are you a clutch rider with your foot always on the clutch?
If so you may have worn out the clutch!

How many miles to you have on your Hyundai Elantra 2000?

Jan 12, 2009 | 2000 Hyundai Elantra

Not finding what you are looking for?
2000 Hyundai Elantra Logo

763 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...