Question about 1991 GMC S-15 Jimmy

1 Answer

Intake to head bolt torque

I need to know what to torque the bolts on a intake to the head on a 1991 mitsubishi mighty max pick up, 2.4 fuel injected, and also do i need to put any kind of sealer between new gasket and head, the intake side of gasket already has factorey sealer on it .

Posted by on

  • Anonymous Mar 15, 2014

    I've got a 78 cj5 4.0 I put on a new intake gasket and I can't get the last bolt in ? to do? HELP!

  • Anonymous Mar 15, 2014

    I have a 78 cj5 4.0. I put a new intake gasket on it and I can't get one last bolt in? to do???? HELP

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Intake bolt torque is 11-14 foot pounds. Note:
to torque bolts & nuts, start in center using
crisscross pattern working outward. And as Far as the sealant goes, you shouldn't need any additional sealant since the new gasket has sealant.(just make sure both surfaces are clean an free of oil.) sometimes if the head or the block show signs of pitting on the matteing surfaces then you could use a litttle of that cooper spray gasket to coat the new gasket.

Posted on Feb 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque for installing the crankshaft for the 2.4 mitymax motor?


Mitsubishi Mighty Max crankshaft bolt Questions & Answers ...

www.fixya.com > ... > crankshaft bolt > Cars & Trucks > Mitsubishi
Mitsubishi Mighty Max cars & trucks crankshaft bolt questions and answers. ...Torque specs for mighty max The head torque specs for 1991 mitsubishi mighty max 2.4 I ... 1989 mitsubishi 2.0 motor crankshaft was turned while timeing belt was off. ...how to install a clutch kit on my 1994 mitsubishi mighty max Disconnect the .

Oct 02, 2015 | Cars & Trucks

1 Answer

Bolt torque sequence on 1991 jaguar xj6 4.0 intake manifold?


intake manifold or head gasket? i know head gasket need a sequential order followed by how many degrees and Lbs of pressure. if its on the intake i doubt it needs an specific torque. just try not to crack the intake manifold since its made of plastic.

Oct 29, 2012 | 1991 Jaguar XJ6

1 Answer

Where is the fuel filter on 1993 mighty max


The fuel pump is located in the fuel tank, and part of the Pick-up/Sending unit.

Jan 21, 2012 | 1993 Mitsubishi Mighty Max

1 Answer

Torque specs of head bolts for 1994 mighty max pick up


2.0L Gas Engine : 65 to 72 ft lbs 2.4L Gas Engine : 65 to 72 ft lbs
2.6L Gas Engine : 65 to 72 ft lbs 3.0L V6 Gas Engine : 76 to 83 ft lbs 2.3L Turbo Diesel Engine : 76 to 83 ft lbs 2.5L Turbo Diesel Engine : 76 to 83 ft lbs

Aug 23, 2011 | 1991 Mitsubishi Montero

1 Answer

Complete torque specs. for entire engine. rods, mains, heads. etc.


Assuming 3.0 V6, per my manual:

All in FT pounds torque,unless noted:

Main bearings: 60
Connecting rod bearing cap nuts: 34
Rocker arm shaft bolts 180 INCH POUNDS
Intake manifold: 168 INCH POUNDS
Exhaust manifold nuts: 18
Crankshaft vibration dampner bolt: 112
Cam shaft sprocket bolts: 70
Head bolts: 76 - 83
If you need others please let me know, when working with Aluminum parts go easy as they can strip easy.
Please let me know if this helped,
Tom

Apr 30, 2010 | 1991 Mitsubishi Mighty Max

1 Answer

1991 Mitsubishi Mighty Max 2D 4X4 V6 3.0L No Start.


you can get pressure specs from your local parts dept, and check injector signal with a noid light

Apr 23, 2010 | 1991 Mitsubishi Mighty Max

1 Answer

Torque specs for mighty max


Per my Chilton's manual tehe bolts should be (cold engine) 65 to 72 FT. Pnds., the cam shaft bearing bolts should be 8x25 = 15 - 19 Ft pnds and the 8x65 should be 14 - 15 Ft Pnds.

The sequence is as follows for the (10 ) head bolts:

7 - 5 - 2 - 4 - 10

9 - 3 - 1 - 6 - 8

I hope this may help,
Tom

Oct 12, 2009 | 1991 Mitsubishi Mighty Max

2 Answers

1989 how to change and were is it located the fuel


itz probly electric located in the gas tank like most new cars now u need to get a haynes or clymer manual that shows step by step-even then it takes some experience-take it slow are u sure the pump is bad check the whole fuel delivery system 1st a pressure regulator could be bad or clogged lines-please use jackstands

Aug 05, 2009 | 1989 Mitsubishi Mighty Max

1 Answer

I have a 1987 Mitsubishi mighty max; how tight should the head bolts be? What should the torque be?


85 foot lbs start in center work your way out start at 45 ft lbs then 65 then 85

Jul 19, 2009 | 1987 Mitsubishi Mighty Max

3 Answers

Wheres the fuel filter on my 1987 mitsubishi mighty max


Hi Paulvilla13,

I'm not sure if your '87 is the same as my '88 or not, but mine is located just in front of the tank. I also have to remove the rear driver-side wheel to get at it.

Hope I've helped, don't forget to rate.

Lazaruselite

Feb 24, 2009 | 1987 Mitsubishi Mighty Max

Not finding what you are looking for?
1991 GMC S-15 Jimmy Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...