Question about 2006 Toyota Camry

1 Answer

4 plugs on back of factory radio what are they for

3 pulgs i use, the fourth is open just want to know what it is for
thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 118 Answers

Its propably for the cd changer

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Please i need diagram to 1986 nissam pickup 4wd drive z-24 8 plugs need help w the wiring from distributor to the plugs;need to know order they go back on my email andujarpena@hotmail.com. thanks


Okay you got it here another diagram. If you are misfiring clean out the distributor it has tendency to oil contaminate,or if your burning rich heavy black smoke its the fuel pump not producing enough pressure, Dont confuse this with the MAF sensor your injector is pulse width modulated.3_29_2012_7_20_47_am.jpg

Mar 28, 2012 | 1986 Nissan Pickup 4WD 1986

Tip

How to install Radio in Honda Accord


Things You'll Need:

* Stereo
* Wiring harness
* Dash kit
* Phillips screwdriver
* Heat shrink
* Lighter
* Wire strippers
* Wire caps


In order to install A Radio first follow steps of Removing the Factory Radio


#1
Open the center console, and you'll see two phillips screws at the bottom. Unscrew both of them.

#2
Remove the drink tray, and unscrew three more phillips screws. The center console is now loose enough to move.

#3
Pull the center console back a few inches to expose two more screws under the plastic part of the gear shift. Remove these screws.

#4
Pull the ashtray out of the dash, and you'll see one more phillips screw. Remove this screw and pull off the plastic panel around the factory stereo.

#5
Locate the metal tray under the factory pocket (below the stereo), and pull it out of the dash. There will be two phillips screws holding it in place; remove those, and then pull the stereo out of the dash. You'll need to unplug the wiring harness that is plugged into the back of the radio.


Now Install The New Stereo

#1
Assemble the dash kit, as shown in the instructions. Put it into the dash where you just took the stereo out. There will be a rectangular opening, and a pocket underneath. The opening is where the radio will go.

#2
Secure the dash kit by screwing in the one screw in the ash tray, and the two in the opening of the panel.

#3
Insert the metal cage that came with the stereo into the opening above the pocket. Ensure that the fit is flush with the pocket. Using a screwdriver, bend the metal tabs upward, which holds the metal cage in place.

#4
Start wiring the stereo harness to the wiring harness. Match wires color by color until all of the wires are paired. For example, if you find a purple wire coming out of the aftermarket wiring harness, plug it into a purple wire from the factory harness. You aren't touching any of the wires in your dash on this step, you are simply wiring the new stereo to the wiring harness.

To connect these wires you'll want to place a piece of heat shrink over one of the wires, strip the ends, twist both ends together, and then pull the heat shrink over the exposed metal parts of the two wires. Heat the heat shrink with a lighter until it shrinks and forms a tight bond between the two wires. When done correctly, you won't be able to pull the wires apart.

#5
Plug the aftermarket harness into the factory plug, and insert the radio back into the dash. If you find wires that don't have a match, be sure to cap them so that the ends aren't exposed. Exposed wires are what cause shorts and electrical problems.

#6
Work in reverse order to put the dash back together. The radio won't be secure in the dash until the dash is put back together.

Hope this helps

Thanks

on Oct 07, 2010 | Honda Accord Cars & Trucks

1 Answer

Hi im putting in a JVC cd/radio in a 1997 ford escort TD,Ive removed factory fitted Ford radio cassette,leaving 5 wires connected to a yellow plug,I have 3 wires coming out of JVC marked yellow memory back...


hi...well i know this might not be of any help, but you can buy a connector that plugs straight into the ford plug, and then you plug the jvc plug/s into that, not cutting wires no messing up the original connector just incase you want to sell the car with original system in it... http://productfinder.autoleads.co.uk/productinfo.aspx?&m=FORD&f=ESCORT&id=463&pID=6889
thats the link for it...if you tell me what colours are on the ford plug i could tell you what goes where...thanks

Feb 04, 2011 | 1995 Ford Escort

1 Answer

Where can I find electrical schema for the radio of a 2002 pontiac Montana, I want to replace the radio by a Kenwood and I don't know which wires are for the speakers? Thanks for your help. Yves


If you go to your local audio shop, you can get a plug adapter. This will hook up to the back of the new radio, and hook to the cars factory system. You can also order the plug on line. It will save you time and hassle. Also should you ever up grade the system, you don't have to worry about splicing more wiring. hope this helps

Jan 12, 2011 | 2002 Pontiac Montana

1 Answer

What spark pulg wire go in order on 6 cly onto spark plug --what is the back 3 plugs in order and front 3 plugs in order


the firing order should be - 1-6-5-4-3-2 , Front Bank 1-3-5, Rear Bank 2-4-6. Hope this helps.

carsandcomps,

Guru, Premium Expert @ Fixya.com

TIP: When replacing spark plugs and wires, do one at a time to ensure each is placed back in it's original position and place.

Jun 14, 2010 | 1991 Oldsmobile Cutlass Ciera

1 Answer

How to install after market radio in 1999 grand Am


just part around radio, make sure you buy a harness plug so it plug to car wiring and radio wiring no cutting wires its easy and a face kit to hold and support after market radio.remove screws holding panel were radio is.then remove screws holding radio.radio slides out unplug antenna and radio conntor pulg in new harness to car wiring then follow directions for the face kit , good luck.

Nov 03, 2009 | Cars & Trucks

2 Answers

Audio wiring problem


Constant 12V+ Blue/Yellow
Switched 12V+ Gray
Ground Brown (or your own wire to a metal grounding point)
Illumination Green
Antenna Trigger Black/Red

Front Speakers 4" Dash
Left Front (+) Pink
Left Front (-) Purple
Right Front (+) Green
Right Front (-) Blue

Rear Speakers 5 1/4" Rear Deck
Left Rear (+) Black
Left Rear (-) Yellow
Right Rear (+) Red
Right Rear (-) White

I a '83 camry, there are 2 seperate plugs that go into a factory radio.
One for Power/and front speakers, and the other for rear speakers.

Sounds as if you are missing part of the harness for the rear speakers (or it is shoved in the back of the dash unused by the previous install). If there is not an un-cut plug in the dash - your only course of action would be to run your own set of speaker wire to the rear.

See this picture... these are the plugs that should go into your factory radio....

f3aa97d.jpg
Metra kit 71-1938 will go from your factory wiring directly into your factory radio.

a65e0b5.jpg
Thanks for using FixYa - a FixYa rating is appreciated for my effort in answering this Freebie question.

Feb 25, 2009 | 1983 Toyota Camry

1 Answer

Navigation upgrade for 2007 9-3 Aero


You will have to have it programmed at a Saab dealer. It wouldn't hurt to remove the old EHU (radio) and see if you have different connectors. Remove the screw covers (4) carefully and remove the screws. Then it will come right out. I think there are different connectors which would mean you are screwed but I am not sure. Make sure you have the Nav. DVD.

Dec 14, 2008 | 2007 Saab 9-3 Aero Convertible

2 Answers

Wiring diagrams


http://www.the12volt.com/

Aug 09, 2008 | 1993 Chevrolet K1500

Not finding what you are looking for?
2006 Toyota Camry Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...