When first starting car, all the dash indicators light up including 4 wheel drive and 4 wheel drive low but when i put select 4 wheel drive the indicator light doesn't light up and the front drive doesn't work.
Something you can do is to tap the 4/4 motor under drivers side on the back of transfer case with key on engine off. Have someone work the buttons as you gently tap the motor. Don't hit so hard as to dent it. Usually works.
SOURCE: Ford explorer stuck in low 4wheel drive
put it back into 2 wheel drive, then reverse 10 or 15 feet, this should unlock the hubs.
SOURCE: 1999 ford ranger 4x4 no 4 wheel drive
solenoid on back of transfer case is defective or no power to it /12 volts
SOURCE: 2002 ford explorer 4x4 will not disengage
Not knowing what type of 4wd engagement sytem you have, this is a guess. Maybe vacuum operated, look for a cracked or disconnected hose.
Or do you have manual locking hubs, that have to be turned manually?
SOURCE: 2001 ford explorer sport trac 4 wheel drive wont work
Start the car
put in " N"
turn the 4X4 switch on
Then put in gear..
What do you see now?
Do the same in reverse when you take out of 4X4
504 views
Usually answered in minutes!
×