Question about 1994 Mazda MPV

4 Answers

My MPV won't shift into park

My 94 MPV won't shift into park. I am unable to take the key out of the ignition. Has anyone had this problem before or know any fix to the pfoblem? The tranny fluid level seems okay.

Posted by on

  • Anonymous Apr 12, 2009

    similiar problem car shifts into park but cannot turn key past accesory level. keeps all accesories on. i disconnected battery and was able to take key out. hook battery back up and key becomes locked

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

The linkage may have slipped enough to keep you from putting the vehicle in park

Posted on Feb 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try reading under the column there are instructions there ref this type fault try depressing the brake with max foot pressure.

Posted on Jul 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1994 mazda mpv timing belt diagrams

Posted on Feb 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If nothing else, I can tell you there is an override located under the steering column. the switch is in the same place as the tilt adjust lever, slightly before it to the right.

Posted on Apr 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda 3 2005 won shift from park and won star either I have to put in neutral to b able to star car?


If it won't shift from park my first question would be how do you get it Into neutral? Sounds like you may have a gear selector sensor issue .

Oct 14, 2013 | 1997 Mazda MPV

1 Answer

2003 Ford Mustang won't shift out of park


Could be the brake switch, or the shift lock solenoid.
Both components would need to be tested. And you may be able to shift out of park if you try before you turn the key switch to the on position.

May 07, 2013 | 2003 Ford Mustang

1 Answer

My 94 acorrd won't shift out of park. when i use the key in the trans release and shift it into drive then the dose not shift right or at a higher rpm then normal. whats wrong?


get a haynes repair manual at your local auto parts store or on ebay,it will tell you everything you need to know to fix your own vehichle

Jan 16, 2013 | 1989 Toyota Pickup SR5

1 Answer

2002 Mazda Tribute 6cyl auto gear shift won't click into park so can't remove keys


Check the mechanism inside the gear lever thumb button in case it has failed.

Nov 15, 2012 | 2002 Mazda Tribute

1 Answer

2002 mazda mpv key won't come out


shift interlock is not working at shifter key wont turn to come out unless signal from switch tells it is in park.

Aug 03, 2012 | Cars & Trucks

2 Answers

Ignition switch won't release key when it is put in park. But when I removed switch and key tumbler, the key tumbler/cylinder releases key. Why won't the key release when it is in park?


Most newer models have a safety feature called
shift interlock. This prevents the key from being turned back
to the lock position if you forget to place the gear selector in park.
Depending on the model,
If it uses a cable, it may be sticking or needs adjusting.
If it uses an electrical solenoid. may be blown fuse or park switch.
Tap, shake, and pull up on the shifter and make sure it's in park.

May 25, 2012 | 1993 Jeep Grand Cherokee

1 Answer

My key wont turn to off in order to remove my key from ignition while in parking


Ignition - Key Stuck In Ignition Switch/Won't Turn Bulletin No.: 06-02-35-005 Date: February 28, 2006 TECHNICAL Subject: Key Stuck in Ignition, Key Will Not Return to Off Position, Shifter Button Won't Release in Park Position (Adjust Shifter Detent Finger) Models: 2002-2005 Chevrolet Monte Carlo Condition Customers may comment on any of the following conditions: - The key is stuck in the ignition cylinder. - They cannot return the key to the off position to remove the key. - The shifter button won't release in the park position. Cause This condition may be caused by the detent finger shifting over time. This may result in mis-alignment and binding of the shift rod on the shift position guide.
WHERE YOUR SHIFTER IS YOU WILL HAVE TO TAKE IT APART ..MAYBE THE RUBBER BOOT IS IT THE WAY,OR THE SHIFT LOCK SELINOID WHENT BAD

Aug 05, 2011 | 2005 Chevrolet Monte Carlo

3 Answers

2002 mazda mpv, key stuck in ingition and it is in park , but the key wont turn all the way to lock, it will only go as far as acc?


Mazda MPV have problems with failing gear shift change assembly ( includes park sensor micro switch)

Pull the fuse for the hazard lights ( 10amp) - if the key comes out, then the switch is defective.

Fix the problem by installing a new change lever assembly - part number for 2000 and 2001 MPV's is LC62-46-10XE with MSRP of $246.90. 2002-2004 would be a LD47-46-10XB with MSRP of $250.40.

May 23, 2010 | 2000 Mazda MPV

1 Answer

Key is stuck and can not shift out of park (94 S10 Blazer 4X4)


Press shifter up past park to loosen lock. Or try wiggling it. If this doesn't work, which it should, then try lightly tapping around ignition with a ballpeen hammer to loosen up the pins.

Aug 29, 2009 | 2003 Mazda MPV

1 Answer

Cant shift into park and key stuck in ignition


USE A WRENCH AND STREACH THE KEY HOLE WORKED FOR ME!!!

Mar 26, 2009 | 1994 Mazda MPV

Not finding what you are looking for?
1994 Mazda MPV Logo

572 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...