Question about 2001 Oldsmobile Alero

1 Answer

Radiator 1995 ford sho the heat is not working what could be wrong

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 100 Answers

Several possibilities here, is there enough water in the engine radiator?, is the heater valve opening? possibly the heater matrix is blocked, try to remove the pipes to it and insert a hose pipe into one of the pipes, water shoulfd flow through easily.

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for 1995 ford taurus sho 3.2L repair manual


Helm.Com ---- OEM Factory Manuals

Will have to spend big bucks,but they are necessary

Jun 05, 2012 | Cars & Trucks

2 Answers

How to change a radiator on a 1996 ford taurus


  1. Step 1 Drive your Ford Taurus up a set of ramps onto a pair of jack stands, if it is a 1996 model or newer. Remove the lower splash shields. For 1986 through 1995 models, you can remove all necessary components from above.
  2. Step 2 Begin by disconnecting the negative battery terminal and draining the radiator into a transportable container. Open the plastic draincock on the lower rear of the radiator and crack the radiator cap.
  3. Step 3 Remove the overflow tube from the coolant recovery bottle and disconnect it from the radiator. On SHO model engines, remove the recovery bottle as well. Next unscrew the shroud and remove it from the retaining clips. Disconnect the wires to the fan motor, and remove the fan assembly and shroud in one piece.
  4. Step 4 Squeeze the hose clamp ends together on the radiator side, and remove the upper and lower hoses. For automatic transaxle models, use either the custom Ford disconnect tool T82L-9500-AH or two crescent wrenches to remove the transmission coolant lines.
  5. Step 5 Disconnect the radiator supports. 1986 through 1992 models will have two upper retaining screws for 3.0 liter and SHO engines. 3.8 liter engines will have two driver's side hex nuts and two passenger side screws. All other models have either the upper screws or the combination of right hand hex nuts and left hand screws.
  6. Step 6 Tilt the radiator backwards toward the engine and lift it out. Fit the new radiator into the support and replace the support screws and nuts. Reattach the hoses and wires in reverse order.
  7. Step 7 Flush the new radiator with either water or a commercial flush treatment. Connect your battery terminals and replace the coolant and let the engine idle for 5 to 10 minutes with the heater on and the radiator cap removed. Top off the coolant as necessary.
Thank you,
Lee

answer found here:
http://www.ehow.com/how_4506379_replace-radiator-ford-taurus.html

Aug 10, 2010 | 1996 Ford Taurus

1 Answer

How to change radiator in a 2001 ford taurus


Instructions Things You'll Need:
  • Ramps and jack stands
  • Phillips and flat head screwdrivers
  • Container for used coolant
  • Crescent wrenches or Ford disconnect tool T82L-9500-AH
  • Hex nut screwdrivers
  • New radiator
  • Flush treatment
  • Coolant
  1. Step 1 Drive your Ford Taurus up a set of ramps onto a pair of jack stands, if it is a 1996 model or newer. Remove the lower splash shields. For 1986 through 1995 models, you can remove all necessary components from above.
  2. Step 2 Begin by disconnecting the negative battery terminal and draining the radiator into a transportable container. Open the plastic draincock on the lower rear of the radiator and crack the radiator cap.
  3. Step 3 Remove the overflow tube from the coolant recovery bottle and disconnect it from the radiator. On SHO model engines, remove the recovery bottle as well. Next unscrew the shroud and remove it from the retaining clips. Disconnect the wires to the fan motor, and remove the fan assembly and shroud in one piece.
  4. Step 4 Squeeze the hose clamp ends together on the radiator side, and remove the upper and lower hoses. For automatic transaxle models, use either the custom Ford disconnect tool T82L-9500-AH or two crescent wrenches to remove the transmission coolant lines.
  5. Step 5 Disconnect the radiator supports. 1986 through 1992 models will have two upper retaining screws for 3.0 liter and SHO engines. 3.8 liter engines will have two driver's side hex nuts and two passenger side screws. All other models have either the upper screws or the combination of right hand hex nuts and left hand screws.
  6. Step 6 Tilt the radiator backwards toward the engine and lift it out. Fit2.gif the new radiator into the support and replace the support screws and nuts. Reattach the hoses and wires in reverse order.
  7. Step 7 Flush the new radiator with either water or a commercial flush treatment. Connect your battery terminals and replace the coolant and let the engine idle for 5 to 10 minutes with the heater on and the radiator cap removed. Top off the coolant as necessary.

Nov 13, 2009 | 2001 Ford Taurus

2 Answers

1995 Ford Taurus Sho 3.2 check engine light blink 3 3 1 3 3


Code 33 is EGR opening not detected, this is caused by a plugged EGR exhaust passage in the upper intake manifold, this is a common SHO engine fault, the valve works but the engine does nothing that the computer can sense, since no gas flows, to verify this is the problem open the egr at idle, the engine should almost die, if nothing happens or only a tiny change in idle speed or quality the passages are plugged, if it does stall or get real rough the egr position sensor (usual code for sensor is 32) may be faulty or the valve is sticking. I was a ford dealer tech for 30 years and did quite a few of these, there is a TSB (technical service bulletin) about this problem

Oct 12, 2009 | 1995 Ford Taurus

1 Answer

I have a 1995 Ford Taurus SHO 3.0 liters. I


Hi did you do a continuity check check if there's a wire shorted or open you'll need a volt meter check if the wires on the crank sensor going to the control module and also the one from the coil to the module there has to be a shorted or open wire check this and get back to me good luck

Sep 04, 2009 | 1995 Ford Taurus

1 Answer

1997 Ford Expedition - cruise control won't work. Need a diagram for the fuse block!Help!


Vehicles involved in the recall include the following:

1998-2002 Ford Ranger
1992-1997 Lincoln Town Car
1992-1997 Ford Expedition
1992-1997 Mercury Grand Marquis
1993-1998 Lincoln Mark VIII
1993-1995 Taurus SHO
1999-2001 Ford Explorer
1999-2001 Mercury Mountaineer
2001-2002 Ford Explorer Sport
2001-2002 Ford Explorer Sport Trac
1992-1993 E150-350 Vans
1997-2002 E150-350 vans
1993 Ford F-Series pickups
1993 Ford Bronco
1994 Mercury Capri
2003-2004 Ford F0150 Lightning
1995-2002 Ford F53 motor homes.

Apr 12, 2009 | 1997 Ford Expedition

2 Answers

1995 Ford SHO


your best bet for a diagram is to ask for a suspension printout at your local dealership. Or take a look under any 86-95 Ford Taurus SLO, SHO, or Sable and they use the same design (the SHO just uses slightly different parts. Here is a link though for a SHO parts list with part numbers. Hope this helps.

http://members.bellatlantic.net/~rbruce/SHOParts.htm

Mar 12, 2009 | 1995 Ford Taurus

1 Answer

Gear box


maybe the linkage is loose or needs to be adjusted

Nov 17, 2008 | 1995 Ford Aerostar

1 Answer

1995 Taurus


It sounds as though the flap for directing hot/cold air has jammed. My 1995 SHO has this issue as well. The solution requires opening the dash and replacing either the motors that control it, the flaps, or the connecting hardware components.

May 27, 2008 | 1995 Ford Taurus

Not finding what you are looking for?
2001 Oldsmobile Alero Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...