Question about 1993 Mercury Grand Marquis

1 Answer

Mercury Grand Marquis '93 problem

I need to remove the driver side door from a '93 mercury, and need to know where the wiring harness for the door electronics disconnects. I have removed the inside door panel, and the covers under the dash, and can see many wiring harnesses and connections, but I don't think any of them are for the door. In order for me to get a closer look in that area, I will need to unmount the parking brake assembly, and I really don't want to do that unless it is necessary.
Looking into the engine compartment, I see more harnesses, but they are all taped together when they go though the firewall. Is there an easy way to get this accomplished? I can't seem to figure it out.
Any assistance would be appreciated.
Thanks,
Stephen Fish
Cross Lanes, WV

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Mercury Master
  • 783 Answers

It would be easier just to disconnect the components in the door and pull harness out of door.The harness is inside the black accordion rubber tube between door and body,just unsnap it at door then pull harness thru.

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wiring diagram 2000 Mercury grand marquis driver door


CHECK WITH YOUR NEAREST MERCURY DEALER FOR HELP!

Jan 23, 2016 | 2000 Mercury Grand Marquis

1 Answer

What is the color code for replacing the light switch on a '94 Marquis with factory alarm and keyless entry?


Here you go. I think this may be what you are looking for. I hope this helps and good luck.

1994 Mercury Grand Marquis Alarm, Remote Starter, Keyless Entry Wiring Information Constant 12V+ Yellow Ignition Switch Harness Starter White/Pink Ignition Switch Harness Ignition Red/Light Green Ignition Switch Harness Accessory Gray/Yellow Ignition Switch Harness Tach Gray/Orange EDIS Module Brake Switch Light Green Brake Switch Trunk Release Purple/Yellow Driver's Kick Panel Trunk Pin Brown/White (-) Light in Trunk Parking Lights Brown Light Switch Head Lamp Red/Yellow Light Switch Hood Pin n/a Factory Disarm n/a Door Trigger Black/Light Blue Driver's Kick Panel Door Lock Pink/Yellow Behind Glove Compartment w/Keyless w/o Keyless (-) Door Unlock Pink/Light Green W/o Keyless Reverse Polarity Horn Wire Yellow/Light Green (-) Steering Column Windows Up LF=Yellow, RF=White/Yellow, Windows Down LF=White/BlackRF=Tan/Light Blue

Mar 26, 2011 | 1994 Mercury Grand Marquis

1 Answer

2004 MERCURY GRAND MARQUIS ALL DOORS OPEN WITH


This sounds most like a worn lock actuator which wouldn't be uncommon. If you need a diagram on how to replace, let me know.

May 09, 2010 | 2002 Mercury Grand Marquis

1 Answer

How do I remove the inside door panel of a 2001 Mercury Marquis


Pop out the window buttons part of the armrest and disconnect the wires. Do the same with the trunk and fuel door buttons. Pop out the two little plastic/rubber whatever they are pieces out of the door pull strap and remove those screws. There's another screw on the bottom edge of the door and the outer edge by the reflector. Pop the bezel out from around the door handle and there's another screw. Pull out and up on the door panel. If you don't know your door code now would be a good time to write down that 5-digit number on the lock control box. You might not have to pop out the button panel or trunk/fuel buttons if you can get your hands behind the panel and take the harnesses apart but you a bad dude if u can.

Jan 11, 2009 | 2001 Mercury Grand Marquis

1 Answer

How do I remove the inside door panel on drivers side


you need to take out the door panal and work from the inside of the panal. Open it from there.

Jan 11, 2009 | 2001 Mercury Grand Marquis

1 Answer

Passenger side mirror


This is a simple job You must remove the door panel. Then from the inside of the door there is 3 bolts that hold it on pull these bolts and unpluge the connector and thats it.

James

May 26, 2008 | 1996 Mercury Grand Marquis

Not finding what you are looking for?
1993 Mercury Grand Marquis Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...