Question about 2005 Mitsubishi Galant

1 Answer

2005 galant the oil light is on only under 2000rpm

I ckecked the oil but its good

Posted by on

  • jjmadeira Mar 14, 2009

    oil light comes on when car is at idle oil was just changed and has new filter

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

This sounds like your losing sufficient  oil pressure this can be caused by a number of things #1 very high milage  generally above 150 thousand #2 clogged oil filter #damaged oil pan/smashed or push against bottom of the oil pump #oil that is past oil change interval of manufacture #sending unit maybe malfunctioning .. i would recommend having a service shop take a look at it rite away  it could save you a lot of money if their is  a problem with your oiling system  

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a 2005 mitsubishi galant manual


If it is a 4 cylinder, then you will see spark plug wires that connect to the top of the engine, under each wire there is a spark plug. These wires are fairly thick, they are around 1/4 inch diameter. You need to be careful pulling them off the engine so you don't leave behind the boot. If you haven't replaced plugs before, it is a little tricky, so good luck.

Mar 25, 2015 | 2005 Mitsubishi Galant

1 Answer

What causes oil check light to show when a car is idling and off when the car is eccelarated?


It is all to do with your oil pressure.
At idle 800rpm with a warm engine your pressure mite be say 15psi.
At 2000rpm that same engine would have a oil pressure of 40psi.
Your oil pressure warning sender is set at about 20psi.
It is only a warning light and not a lot to worry about for 15psi at idle is enough to keep up with a engine that is not under a lot of strain.

Feb 27, 2015 | Cars & Trucks

1 Answer

Mitsubishi galant viento 96 auto trans looses drive over approx 2000rpm


Have the tranny oil level checked first off.. Next have the tranny pressures checked as it appears that you are not getting sufficient pressure to hold the gears. May need a tranny adjustment in the bands and clutches in the box

Feb 10, 2013 | Mitsubishi Galant Cars & Trucks

1 Answer

2005 misubiche galant 3.8 miss fire on no.4 cyl replaced plugs oil on one plug


you need to replace your valve cover gaskets. There's oil seals under the valve cover gaskets that leak causing oil to get around your plug wires.

Feb 07, 2010 | 2005 Mitsubishi Galant

1 Answer

What does a 30k service check up consist of on a mitsubishi 2005 galant


oil change air filter if its dirty a lot of checking and refilling fluids powerstering brake fluid antifreeze radiator,etc..

Feb 06, 2010 | 2005 Mitsubishi Galant

1 Answer

Engine light on wont go over 3000rpm or under 2000rpm


Try the IAC valve this regulates the idle.

May 22, 2009 | 1998 Mitsubishi Galant

1 Answer

When revolution hits 2000rpm the battery LED indicator lights up


it sounds like the voltage regulator is failing under a load, i would have a parts store or good trustworthy technician test your alternator. good luck,

May 22, 2009 | 1993 Toyota Corolla

1 Answer

Mazda 3 2005


Only way to know whats going on is to have the engine light checked with a OBD II diagnostic tool, there's a data link connector under the drivers side dash that it plugs into, you can buy one at most auto parts store's, or if you don't want to buy one some auto parts store's will check the engine light with a tester at no cost, for example auto zone, or you could take it back to the mechanic to see if he can diagnose the problem. The service engine light come's on when the pcm (powertrain control module) senses a problem. good luck !

Mar 31, 2009 | 2004 Mazda 3

Not finding what you are looking for?
Cars & Trucks Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...