Question about 2007 Mercedes-Benz R350

1 Answer

Tail lamp problems on 2006 R350

I have replaced the tail lamps on my 2006 mercedes R350 but it still is not fixed. it is still giving me a "tail lamp out, substitute is on." please help.
Thank you

Posted by on

  • 1 more comment 
  • yasminzeyad Feb 21, 2009

    I just took my car to the dealer and they changed the bulbs for free. It is working fine. Why can not you take your r350 to the dealer??????



  • cred15 Mar 02, 2009

    I have a tail lamp out on the right rear side. I replaced the bulb with a new one, but the light still did not work. The bulb on the left side worked, so I moved it to the right side. This situation didn't work. Any ideas???

  • Anonymous Mar 30, 2014

    push excelerator down.sluggish exceleration.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just took my car to the dealer this morning. They changed the bulbs for free and it is working fine! take your car to the dealer unless it is out of warranty?

Posted on Feb 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing backup bulbs on 2005 buick rendevous


TAIL LAMP ASSEMBLY AND /OR BACKUP, SIDEMARKER, STOP, TURN SIGNAL BULB REPLACEMENT

REMOVAL PROCEDURE

1. Open the liftgate.
2. Remove the screws from the tail amp.
3. Slide the tail lamp rearward in order to disengage it from the retainers on the rear body panel.
4. Disconnect the electrical connector from the tail lamp wiring harness.
5. Remove the tail lamp and side marker lamp sockets from the tail lamp, depressing the locking tab and turning counterclockwise.
6. Remove the bulbs from the tail lamp and the side marker lamp sockets, if replacing the bulbs.

INSTALLATION PROCEDURE

1. Install the bulbs to the tail lamp and side marker lamp sockets, if removed.
2. Install the tail lamp and side marker lamp sockets to the tail lamp, turning clockwise until the locking tab is fully seated.
3. Connect the tail lamp electrical connector to the wiring harness.
4. Position the tail lamp retainer slots to the tabs on the rear body panel.
5. Install the tail lamp to the rear body panel, pressing into place until fully seated.
6. Install the tail lamp screws to the Taillamp.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the tail lamp screws to 2 N.m (18 lb in).

7. Close the liftgate.

Apr 16, 2017 | Buick Cars & Trucks

1 Answer

Tail lights, instrument panel lights, and license plate lights not working. Fuse blows immediately when changed.


that line on that fuse is shorted, the fuse saved the fire.
we use an ampclamp DC ammeter to find the wire that is shorted
and the actual point of short.

the park-tail circuit (tail fuse, right) is the most complex of all.
20 lamps inside car, and many out side, it is the hardest to find of all shorts. but not with the tool
first check for damage behind all park lamps
i bet the fuse blows in park (1st click) not head lights. right?
side lamps the 4 front rear park lamps, some call it tail its not really tail now, was in 1920 ,not now. park is everywhere.
but the fuses can be marked tails, for fun .
imagine, calling the 2 front lamps tails. and are on .(my on going joke)
sidelamps,
the inside lamps are many too.
all dimmable lamps. so turn the dimmer down to zero and see if fuse blows now, NO?, bingo.

the best way to fix this is , visual inspections for collision damage or wire hacks in the cab.
then the fuse is pulled and circuit breaker inserted 15amp
(they sell em)
then we connent the ammeter to the wire (output of fues)
i push the switch and amps goes to infinity and the CB trips
if follow the cables, and find what line is shorted.

i missed one problem
on the rear or front 4 corners of the car may be twist lock blubs.
like 1157 or? these love to short. push in lamps never short.well not the lamp actual.
in not sure what lamps the 06 uses, but replace the brass based lamps. (in park tail ckt)


Jan 02, 2014 | 2006 Toyota Matrix XR

1 Answer

Where to locate fuse for brake/tail light on a 2007 mercedes benz gl450


Unfortunately, you vehicle has 3 different fuse panels. If you look under your rear cargo deck (where the tool kit is), you will hopefully find a "fuse map". I believe the tail lamp fuse should be in the rear fuse panel.
I'm not sure where you live, but in Canada there is also a campaign to replace the tail/brake lamp sockets.

Feb 01, 2013 | 2007 Mercedes-Benz GL450

1 Answer

I've located the fuse box locations for 2006


i know on a gl320 there is a chart in with the spare tire

Aug 20, 2011 | 2007 Mercedes-Benz R350

1 Answer

How do i replace a 2006 A6 rear light. I crashed into a wall in the ice and it broke the plastic. I have a full replacement unit.


Rear iignts in rear na, removing and instaiiing

Fig. 325: Rear Lights In Rear Lid, Removing And Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing

CAUTiON: • Switch off all electrical components.

. . Switch ignition off and remove ignition key.

o Turn light switch into "0" position.

o Open cap - 1 - for warning triangle.

o Rotate quick-release screw - 2 - counter-clockwise 90 C and remove cover - 3 - from luggage compartment lining - direction of arrow -

Fig. 326: Removing Bulb Socket From Housing, Pressing Catch Bracket Downward

Courtesy of VOLKSWAGEN UNITED STATES, INC.

o Disconnect electrical harness connector

o Remove bulb socket - 1 - from housing, press catch bracket - 2 - downward - arrow - to do so

Fig. 327: Identifying Nuts, Clamping Bracket, Inner Tail Lamp, And Clamp Mounting

Courtesy of VOLKSWAGEN UNITED STATES, INC.

o Unscrew nut - 2 - and remove clamping bracket - 1 -

o Remove nut - 4 - and remove inner tail lamp - 3 - toward outside

o Remove clamp mounting - 5 - from body cut-out

Fig. 328: Identifying Clamp Mounting, Nuts, Inner Tail Lamp, And Tabs

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing

Installation is the reverse of removal, noting the following:

NOTE: • Make sure seal between body and tail lamp housing seals properly.

. Attach clamp mounting -2 - at inner tail lamp and screw on nut -3 - loosely.

. Attach inner tail lamp -4 - at body cut-out and make sure grip tabs - arrows - of clamp mounting rest against body cut-out

. Slide clamp mounting - 1 - onto threaded pin of inner tail lamp and tighten nuts - 3 - and -5 -.

Jan 19, 2011 | 2006 Audi A6

1 Answer

How do you replace the tail light bulbs on a 2006 Pontiac Vibe


Tail Lamp: Service and Repair
TAIL LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Open the rear compartment lid.
2. Remove the rear compartment trim panel (4).
3. Disconnect the tail lamp electrical connectors.
4. Remove the following components from the vehicle:
- The 3 nuts (3)
- The tail lamp (7)
5. Remove the following from the tail lamp:
- The stop lamp socket (2)
- The turn signal lamp socket (5)
6. Remove the following from the lamp sockets, if necessary:
- The stop lamp bulb (1)
- The turn signal lamp bulb (6)
INSTALLATION PROCEDURE
1. Install the following to the lamp sockets, if removed:
- The stop lamp bulb (1)
- The turn signal lamp bulb (6)
2. Install the following to the tail lamp:
- The stop lamp socket (2)
- The turn signal lamp socket (5)
3. Install the tail lamp (7) to the vehicle. Secure the tail lamp (7) with the 3 nuts (3).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the tail lamp nuts to 10 N.m (89 lb in).
4. Connect the tail lamp electrical connectors.
5. Install the rear compartment trim panel (4) to the vehicle.
6. Close the rear compartment lid.

Oct 30, 2009 | 2003 Pontiac Vibe

1 Answer

How to reset computer,when you change oil..r350 mercedes 2006


The answer is in the owners manual. If you don't have one the service department at the local Mercedes Dealer will probably show you for free...it only take a moment to do.

Aug 29, 2009 | 2007 Mercedes-Benz R350

1 Answer

NEED TO REPLACE A TAIL LIGHT BULB IN A 2005 CHEVROLET IMPALA


and Repair Notes TAIL LAMP REPLACEMENT REMOVAL PROCEDURE Open the rear compartment. Remove wingnut and pull back the rear compartment trim panel from the tail lamp. Remove the wingnuts from the tail lamp. Remove the tail lamp from the rear body panel. Disconnect the electrical connector from the tail lamp. Remove the tail lamp socket, turning counterclockwise. Remove the bulb from the tail lamp socket. Remove the sidemarker lamp socket, turning counterclockwise. Remove the bulb from the sidemarker lamp socket. INSTALLATION PROCEDURE Install the bulb to the tail lamp socket. Install the bulb to the sidemarker lamp socket. Install the sidemarker lamp socket, turning clockwise. Install the tail lamp socket, turning clockwise. Connect the electrical connector to the tail lamp. Install the tail lamp to the rear body panel. Install the wingnuts to the tail lamp. Pull back the rear compartment trim panel to the tail lamp and install the wingnut. Close the rear compartment.

Jun 08, 2009 | 2005 Chevrolet Impala

2 Answers

Brake lamp left,brake lamp right,brake left sub.on,brake right sub. on is the message on my mercedes ml 350 dash. What could be the problem when both bulbs are testing good?


HI, There is a problem with your tail lamp assemblies. Mercedes has recognized the problem and came out with a safety recall for this situation. Check with your local dealer to see if they are covered under warranty.

Mar 14, 2009 | 2006 Mercedes-Benz ML-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

736 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...