Question about 2003 GMC Sierra

2 Answers

Where is the 4x4 encoder motor sensor located on my 03 sierra

Where is the 4x4 encoder motor sensor located on the 03 gmc sierra 2500 slt

Posted by on

  • Anonymous Mar 17, 2014

    How do I install a soundgate line output box in a 2011 gmc 2500 Sierra ?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 124 Answers

The encoder motor sensor is inside the encoder motor. the encoder is located at the transfer case. Remove the encoder and by part number 88962315 this is the sensor. you will have to retime the motor after
hope this helps

Posted on May 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

The encoder motor is on the front of the transfer case.

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 not working


encoder motor sensor or encoder motor disconnect battery for a full 3 minutes and retry if it shifts encoder motor sensor is out

Dec 06, 2012 | 2002 GMC Sierra

1 Answer

Where is the 4x4 encoder sensor located on my 2004 sierra 1500


Most times it's right underneath the dashboard by the gas pedal.

Mar 29, 2012 | 2003 GMC Sierra

1 Answer

What is the engine size on a 1991 gmc sierra 2500 4x4


That year you probably have a 5.7 or 5.0 motor. You can find the engine size by getting your VIN and calling the dealer. They can tell you from either the 8th or 10th number in the VIN

Jan 29, 2012 | 1991 GMC Sierra

2 Answers

Have a gmc 2005 sierra the 4x4 doesn't work. when I press the 4x4 button blinks a few times,and then makes like grinding sounds,it sounds that is coming from transfer case,but never engage and ligth goes...


Not good! there is a sensor in your transfer case that senses that you are now in four wheel drive if your transfer case does not lock in it will set a code and the light will flash and default back to two wheel drive. check the fluid level in the transfer case and front differential for a sign of internal failure. that is causing the grinding sound.

Feb 05, 2011 | 2005 GMC Sierra

1 Answer

The truck says service 4x4. I press the 4x4 button and it won't change to 4x4. It stays in 2 wheel drive. Could it be a censor? The light sometimes doesn't show color in 2 wheel drive.


I have seen problems in both the dash switches and encoder motors on the side of the transfer case. You need to have the 4x4 module scanned for codes.

Jul 29, 2010 | 2005 GMC Sierra

1 Answer

What is the round perforated disk above the driver in a 03 gmc sierra 2500 it is about the size of a toonie .....


Inside air temperature sensor? Does your Sierra have automatic temperature control for the heater/air conditioner?

May 21, 2010 | 2003 GMC Sierra 2500HD

1 Answer

I have 2002 gmc sierra 2500 slt the heater blower will not turn off even with the key turned off


the blower switch is bad. or somebody wired it direct to the fuse box or the battery.

Nov 29, 2009 | 2002 GMC Sierra

3 Answers

4X4 inop on 2003 GMC Sierra 2500HD


I have found that when you are going to engauge 4x4 high, it is best to only be going about 3 miles an hour. Not faster, not stopped. It likes some movement to help it mesh. I've had perfect shifts since I started this. Hope it helps. Wade.

Jan 09, 2009 | 2003 GMC Sierra 2500HD

1 Answer

2007 gmc sierra 2500 IAT sensor


Well, the IAT (Intake Air Temperature) sensor is located on the air intake duct between the filter and the throttle body (Assuming you have the 6L motor). The wires are easily visible at the plug that connects the sensor to the wiring harness. That's the easiest place to access them.

May 18, 2008 | 2004 GMC Sierra 2500

Not finding what you are looking for?
2003 GMC Sierra Logo

Related Topics:

2,349 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...