Question about 1988 Volkswagen Golf

1 Answer

Started with difulties volkswagen 1988 GL

When I start my car I need to press 10 times gas pedal latel when started it stoped on idle speed. Later on when I drive at list one hour it became better. Some michanic saied I have black smoke and rich gas from pipe. I changed you know srew and making is less tsking gas but still rich gas contest in my pipe

Posted by on

  • skahbiev Feb 16, 2009

    no prob, replace the fuel injection module. common problem

    This is good but fuel injection module means gas pump? or somethign different. Now my car is making noises metal dzim dzim and oil light is beeping

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

No prob, replace the fuel injection module. common problem.

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the idle speed control valve on vw polo 1998 classic located


There is no idle speed control vale if it is Bosch mono motronic. idle speed is controlled by throttle actuator, ( electric motor) that is on the left hand side of the throttle body.

Jan 09, 2013 | 1987 Volkswagen Jetta

1 Answer

2009 mini cooper clubman with sport button-delay when press on gas.


The fuel pressure and fuel system needs to be inspected.
-------
I suggest you few helk links.Click the link below and follow its troubleshooting procedure:------------------Pushing on the gas pedal, but the car slows down? Gas pedal to the floor and the car slows down? http://technoanswers.blogspot.in/2012/02/pushing-on-gas-pedal-but-car-slows-down.html
-------------
Car dies when gas pedal is pressed? http://schematicsdiagram.blogspot.com/2011/12/car-dies-when-gas-pedal-is-pressed.html
---------------
Car won't start without hitting the gas pedal? http://schematicsdiagram.blogspot.com/2011/12/car-wont-start-without-hitting-gas.html
-------------Car only starts when gas pedal is pressed? http://technoanswers.blogspot.com/2012/01/car-only-starts-when-gas-pedal-is.html
----------1999 Ford F-150 Idles rough and quits when gas pedal is pressed less? http://technoanswers.blogspot.in/2012/01/1999-ford-f-150-idles-rough-and-quits.html
----------Delay starting on Toyota Prius? http://schematicsdiagram.blogspot.in/2012/02/delay-starting-on-toyota-prius.html

--------
These will help.
Thanks.

Nov 26, 2012 | Cars & Trucks

1 Answer

1988 22r pickup have to pump the gas now before starting 15 to 20 times. i didnt use to have to pump the gas before every start if it sits more than 10 hours it wont start unless i start pumping the gas...


Seems like the choke is not turning on. The 22r uses a carb if I'm not mistaken. pump it a couple of times then try pressing the pedal completely down before trying to start it. Then press the pedal half way down. the point is to set the choke when you press the pedal all the way down.

Oct 31, 2011 | 1988 Toyota Pickup

1 Answer

1988 subaru GL 10. It wont start after it has ran a while. The humming noise that I assume is the fuel pump coming on just before I start to crank does not hum on those occassions when it wont start. If...


Most likely a bad fuel pump, try turning the engine over while someone bangs on the fuel pump, located under the car about the right rear passenger seat area, if it starts you have a bad pump & it needs to be replaced.

Jan 15, 2011 | 1988 Subaru GL-10

2 Answers

1998 cavalier Z24 quad 4. Very hard to start, most of the time gas pedal must be depressed to start car, once car is started poor idle. a moment or 2 later idle improves, still alittle rough. scan tool...


Check the Idle Air Control (IAC) valve. If this gets sticky, clogged, or otherwise malfunctions, it will affect the idle quality, and usually not in a good way. You should NOT have to press on the gas pedal ever to start your car as it has fuel injection.

Dec 23, 2010 | 1988 Chevrolet Cavalier Z24

1 Answer

My 1988 gl 4 speed with carburator dies when put in nuetral just prior to a stop.


Way more info is needed. Check the fuel filter. Could be plugged just enough to starve at a low idle but gets enough when you have higher rpms. Does it sputter at an idle? Could be so many things, to electrical, including needing the carburetor rebuilt.

Apr 06, 2010 | 1988 Subaru GL-10

1 Answer

1988 5 speed Honda Accord


Ensure your spark plugs,wires (ignition coil and spark) and your filters (air and fuel) are within 2 years of installation It's erratic at 800 rpm as the engine is cold and they like the 2200 range for 3 minutes before they kick down on their own. Press the pedal twice before inserting your key. The owners manual states depending on the outside temperature, the engine will require more priming. Update if possible.

Oct 25, 2009 | 1988 Honda Accord 4 Door

1 Answer

Idling lower than 1,000 rpms. at high speeds,


Had a firebird act similar to that had a bad coil pack replaced it the spark plugs and wires and ran fine.

Oct 13, 2009 | 2005 Volkswagen New Beetle Convertible

1 Answer

1989 toyota supra hesitates and won't start


If Engine Starts with accelerator pedal depressed , check idle speed control valve (if equipped) and wiring connection. Did you check for vacuum leaks. Do you know if your ignition timing is correct? How did you check your fuel pump? I take it no codes have been set, so if not there are several things to check for when the engine stalls #1 is to check cold start injector and cold start injector time switch. If engine stalls sometimes- check airflow meter and connectors You can tap the connector or relay or wiggle and notice if there is a slight change in the engine idle.

Jul 31, 2009 | 1988 Toyota Supra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...