Question about 2001 Toyota Sequoia

1 Answer

Cannot Disable the 4 wheel drive on my 2001Toyota Seqouoia

I engaged the 4 wheel drive by pressing the 4 wheel drive button on the dashboard. Now the little indicator on the dashboard keeps on blinking the little red dot in the middle, and it wont disengage the 4 wheel drive.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Not sure if this works with your car or not but it's worth a try.

Place in park
start motor
put foot on the brake
place car in neutral
If your car has a button marked 2wd push it. This should return you to 2wd mode
return car to park
turn off motor and remove foot from the brake.
BUT the best thing you can do is read your owners manual if you do not have one call your nearest Toyota dealer and ask for the service department and ask them how to put it back into 2wd

Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy blazer 2005 zr2 will not go into the 4X4 option either hi / lo or auto 4X4 press the button into each one and all it does is keep blinking and will not engage into 4 wheel drive


under your batt tray needs removed youll find a rubber hose goin to a vacume canastersee that it aint cracked or got a hole

Oct 27, 2012 | Cars & Trucks

1 Answer

How do I use the 4 wheel drive on my GMC Yukon 2004. What dash button turns the 4 wheel drive on?


Hi, depending on the vehicle, there can be different controls. Standard control, 4hi, use in slippery conditions, never on dry pavement. Just push the button, and it will engage. 4low is for extreme conditons and the transmission must be in neuteral to engage 4lo. If you have auto 4wd button, just press the button in slippery conditions. If you have a denali, it is all wheel drive, and there are no buttons to push. So, depending on the model, there are multiple ways, but pushing the button engages it. Good luck...Goop

Dec 12, 2010 | 2001 GMC Yukon XL

1 Answer

How do i use the 4wd


Hi,

Bring your vehicle to a full and complete stop. The system will not properly engage if the vehicle is moving.

Shift the vehicle into first gear, second gear, or reverse before engaging the 4-wheel-drive system. The system is limited based on the speed of the vehicle, and these gears are within the speed range of the system's capabilities.

For Honda piliot, engage the VTM-4 system by pressing the VTM-4 Lock button on your Pilot's dashboard. The button will illuminate to confirm that the system is engaged.

I hope this helps.


Nov 30, 2010 | Mazda MAZDA6 Cars & Trucks

1 Answer

1988 Jeep Sahara, 4 wheel drive will not engage


maybe its just the indicator thats not lighting up

Feb 26, 2010 | 1988 Jeep Wrangler

1 Answer

Lost 4 wheel drive in 2003 trailblazer. What are some things i can check to solve problem.


If your trailblazer has a dash mounted button to engage the four wheel drive then first I would check the fuse panel and see if any fuses have blown. Depending on milage you may have had a servo fail. A servo is an electrical device that engages the four wheel drive when the button on your dash is pressed.

Feb 16, 2010 | 2003 Chevrolet TrailBlazer

1 Answer

4 wheel drive will not engage 4 wheel drive button is pushed


bad trasfer case selector motor common problem i ve a ton of these replace that motor and youll have 4 wd again ,the part is costly about $ 300.00. hope this helps.

Dec 13, 2009 | 1999 GMC Jimmy

1 Answer

The 4X4 on my 2002 Ford Explorer doesnt work.


Switched the fuses out for new ones

Jan 30, 2009 | 2002 Ford Explorer

1 Answer

1998 Chevy Blazer 4x4, $ wheel drive won't work (both 4hi & 4lo )


Reset the computer by disconnecting the battery. This should solve this. nutetral is for the four lo only to engage.

Mike

Jan 26, 2009 | 1997 Chevrolet Blazer

1 Answer

When you press the shift on the fly button s on the dash for 4 wheel drive the light keeps flashing but after 2 or 3 flashes it is suppose to stop. It seem like the 4 wheel drive isn't fully engaging.


If the light is continuing to flash the 4X4 is not engaged, most likely the motor that engages it on the transfer case is either stuck or defective.

Nov 28, 2008 | GMC Canyon Cars & Trucks

Not finding what you are looking for?
2001 Toyota Sequoia Logo

618 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...