Question about 2000 Buick LeSabre

1 Answer

License plates light do not work in 2000 buick la sabre. Fuses are ok and lights are new

Posted by on

  • Anonymous Mar 30, 2014

    no license plate and reverse lights do not work

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 6,982 Answers

Check light socket grounding...repair as necessary Check power at hot side of light socket with a test light, grounded on a clean unpainted part of chassis. If light lights, then check ground side of socket.

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Running and license plate lights on deck lid not working. Back-up lights work. Bulbs are good. Qtr panel lights/brake lights work. Separate fuse for those, or wiring short?


Check for the presence of power at those junctures. If there then look for a bad ground. If not there you need to find out where the power is being tapped from and check out the fuses/relays in between.

Sep 15, 2016 | 2000 Buick Century

1 Answer

License plate light in my 1996, 3.8, Buick regal is not working. Which fuse is the one that should be checked?


the license plate light is part of parking lights it is power by parking lights.does your parking lights works if yes look for bulbs or wiring in trunk.

hope it helps

Mar 16, 2014 | Buick Regal Cars & Trucks

1 Answer

1991 Park avenue, Tail lights and license's plate light's stopped working turn signal's hazards and brake lights still functional. but no tail lights or license plate lights


Check for Power on your License Plate Light, more than likely you have lost GROUND

Turn Signals, Do the Front Work and the Back don't? If NONE then FLASHER FUSE

Apr 09, 2013 | 1991 Buick Park Avenue

1 Answer

How do I replace license light bulbs in my 1995


I have a 2002 which is a little different body style but it may be the same process. You have to take the back plastic section that holds the license plate loose from the car. There are bolts that are inside the trunk that hold the plastic panel on. Mine are in the trunk lid. If your plastic panel, license plate, etc. goes up with the trunk lid they are in the lid. You need deep type sockets to reach the nuts, at least mine does.

Mar 31, 2010 | 1995 Buick LeSabre

1 Answer

2000 Buick Lesabre custom liscense plate bulb


kind of tricky, took me an hour to get it figured out, but you got to opend the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together

Mar 08, 2010 | 2000 Buick LeSabre

1 Answer

I have a 2000 buick century back up lights aren't working, changed bulbs and notice that the license lights aren't working either. Checked the taillamp fuse it's okay. Is this the right fuse?


The back up lights may be on a separate fuse from the tail lights. The license plate light should be fused with the tail lights though. The bulbs are good on the license plate light too? Did you have the ignition switch on when you were checking the back up lights? It could be the neutral safety switch is out of adjustment or the switch is bad. Does the car start OK in both neutral and park? If so the switch adjustment is probably good, but the back-up light portion of the switch could be bad. That switch is located on top of the transmission, about right under the master cylinder for the brakes. You have to disconnect the shift cable lever from the trans to get the switch off.

Jan 21, 2010 | 2000 Buick Century

1 Answer

License plate light do not work changed fuses and


check ground wire and clean bulb socket and contact points well with a high # grit sand paper

Dec 07, 2009 | 2000 Chevrolet Blazer

1 Answer

Brake light will work but not running light in rear drivers side


change the bulb in the tail light. And check your fuses for the license plate.

Mar 20, 2009 | 2000 Chevrolet Silverado

1 Answer

License plate lights in the trunk lid.


The license plate bulb is replaced by removing the two scews that hold the lens in place and pulling the lamp housing out of the trim plate the removing the socket.

Jul 15, 2008 | 1998 Buick LeSabre

Not finding what you are looking for?
2000 Buick LeSabre Logo

Related Topics:

438 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...