- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the pulley nut comes off by turning it to the left yes counter clockwise and all you need is a steering wheel puller in most cases the pulley comes out by prying on it on one side with hand and tapping the opposite side with brass hammer.
Remove the wheel ,then track end ,brake caliper support ,the pinch bolt that holds housing to the strut ,lower track control arm swivel.pull off and place on bench .knock the centre hub piece out and on the inside of the housing is a big circlip that holds it in .Then take to a garage and have the old one pressed out and the new one pressed in.stripping shouldnt take more than 35mins ,visit to garage for the pressing?? allow 2 days --- refitting max half hour
If the sound is all the time, no matter what you are doing then it is the Transmission going bad. CV Joints, Wheel bearing will only make the noise when in rotation.. Also remember that this is a front wheel drive car, so it will throw you off thinking it is the wheel bearings or CV joints due to the front wheel drive