Question about 2000 Chevrolet Camaro

1 Answer

Bad weather seals and a falling rear window.

Where can I order some better weather seals for my Side doors? And I get a solution for my falling rear convertible window pls!!!!

Posted by on

  • snshn_thomas Feb 18, 2009

    it didn't have my car listed.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 90 Answers

Steelerubber.com. Need more info about problem with window.

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im looking for the rubber seal that goes all around the driver side door and im looking for the rear passenger side window motor


Rear pass window motor is available at any good parts store. Go to dealer with the vin for the drivers door weather seal.

Feb 23, 2011 | 2003 Dodge Caravan

1 Answer

Power windows -window falls inside the door, won't go up


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you should see the cause.
It could be the window has fallen off it's base (not likely), a cable has disconnected or broken (most likely), motor burned out (maybe)

Sep 23, 2009 | 2005 Chrysler PT Cruiser

1 Answer

How do fix drver side rear sliding door window


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll see the innards of the door

Sep 21, 2009 | 2000 Mazda MPV

1 Answer

Electric Window problem


It sounds like the regulator or track is lined up properly.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll see everything

Sep 17, 2009 | Dodge Cars & Trucks

2 Answers

No power to the passenger rear window


I assume you've tried with the driver's door switch and the rear passenger switch and nothing happens. If so, then it's unlikely that both switches went bad and it points to a bad motor...
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. You can test the switches at this point to see if they work. If not, you can then pull off the weather seal and access the regulator, motor inside the door that will be held in by several bolts

Aug 24, 2009 | 2003 Buick Regal

1 Answer

Passenger side rear door only opens from inside.


It sounds like the linkage connecting the door handle to the latch has disengaged....you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. You can then pull off the weather seal in order to see the inside of the door....

Aug 20, 2009 | 1999 Volkswagen Passat

1 Answer

How do I get access to the rear passanger side


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Aug 14, 2009 | 1994 Lexus GS 300

1 Answer

Rear window fell down need help fixing


You'll need to remove your door panel (screws are by the door handle, arm rest, under door and side of door) and pull back the weather seal (can't reuse the seal) in order to see the assembly. It sounds like either the support arm broke, or the gears are stripped

Aug 12, 2009 | 2000 Buick LeSabre

2 Answers

Water standing floor of 1991 corsica


That can be caused by the door or window seals. Around all your doors there is a rubber seal, this seal can degrade and allow water into the interior. There are also seals around the windows and front and rear windshields. If I were you I would visually inspect all the rubber seals on all your doors and windows, if any part of the seals is worn it should be replaced. You can buy universal weatherstripping kits off the shelf at any auto parts store to replace any of yours that are bad and it's pretty easy to install. You can also pick up a tube of silicone sealent to seal any small gaps or cracks in the existing seals.

Hope this helps

Feb 18, 2009 | 1991 Chevrolet Corsica

2 Answers

03 impala passenge has FLOOR were it come from


pop the hood and take out the plastic shroud on the passenger side at the firewall. there is a rubber weather stripping that will direct the rain water off the wind shield other wise the rain will fall directly onto the top of the fan motor then run down onto the carpet. i noticed mine when the fan motor iced up and was about an inch thick of ice. all i did was RTV on the weather stripping to redirect the water good luck.

Feb 02, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
2000 Chevrolet Camaro Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...