Question about 2000 Oldsmobile Silhouette

1 Answer

Rewiring sliding side doors on 2000 Olds Silhouette

The previous owner disabled the sliding door mechanism by having a wire unplugged & I would like to enable it again, how do I do this.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 98 Answers

I checked on bulldogsecurity.com to get an idea of the placement of where this plug might be for the sliding doors. It says that it is a light blue wire and it says that it is in the passenger kick panel. What that may (probably) means is that when you open the door you might have to pull up the plastic trim that runs along the bottom of the door and try to find this wire. Trace it until you find the plug. I hope this helps. If not post again and I'll try to help further.

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a olds silhouette 2000 3.4. On my driverside I bought the lock and unlock switch thinking it was damaged. But it does the same thing like the old one it unlocks but doen't lock why?


Possible broken wiring in drivers door where it exits door and enters vehicle. The wiring flexes each time door is opened and can cause wiring issues.Inspect wiring for damage in this area

Jul 09, 2015 | Cars & Trucks

1 Answer

1999 Olds Silhouette - switch panels on both doors are not working


sounds like broken wire/s where they are routed from the body to the door. wiggle the cluster of wires while trying to operate the switchs.

Apr 06, 2013 | 1999 Oldsmobile Silhouette

1 Answer

My 2000 Olds Silhouette power door windows will not go up or down when the doors are closed, but they will work when the door or doors are open or ajar.


closing the door is putting pressure on the door glides,, check to see if the door jam is pushing on a misaligned door window frame,, if it is,, you need to realign the doors upper part that houses the window,, this is often caused by someone simply leaning or hanging on the window frame while talking to someone,,

Jun 03, 2011 | 2000 Oldsmobile Silhouette

2 Answers

The power sliding side door on my oldsmobile 2002 silhouette keep opening and shutting continuously. I changed the fuse as it wasn't closing before. help


i had the same problem with mine, on the door there is a metal contact that gets coroded. i wire brushed the plate then it closed and opened fine.

May 25, 2010 | 2002 Oldsmobile Silhouette

1 Answer

2002 Old Silhouette Driver Power Sliding Door will not open


Look in your owners manual there is a procedure to reset the door controls. If that dosen't work maybe the motor is burnt out, it's in the left rear access panel.

Mar 25, 2009 | 2002 Oldsmobile Silhouette

1 Answer

My driver side mirror broke off on 1999 olds silhouette can't get door panel off found 2 bolts anything else or just force loose?


If you removed the 2 bolts near the handle (1 you reach by removing the lock & pwr windows control panel by prying it up, it will pop loose) there are plastic bolts/clips that press in through openings around the edge of the door panel. Just pry out slowly and they should pop out. Work your way around the door. It should slide off over the release handle which you may want to pull outward so it slides over it easier. I just did this 2 days ago to replace my passenger mirror.

Mar 08, 2009 | 1999 Oldsmobile Silhouette

2 Answers

Door will close but latch will not lock


Try and check the latch in the door sometimes they catch and don't open all the way it may take a screwdriver to pry it up or it could be a clip has broke inside the door on the trip mechenizm and won't let it hit the spring tension to lock it shut.

Dec 16, 2008 | 1999 Oldsmobile Silhouette

1 Answer

Door Ajar Warning Light Stays On


Our Ford Expedition & an Olds Silhouette Premier & both did the same thing. Someone online said to spray the inside door where the metal connects with the frame & sensors are there with WD-40. We did & it fixed the problem. Maybe this will work for yours.

Aug 14, 2008 | 2000 Oldsmobile Silhouette

Not finding what you are looking for?
2000 Oldsmobile Silhouette Logo

453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...