Question about 1998 Ford Ranger SuperCab

1 Answer

1998 ford raner not getting any fire

1998 ford ranger does not seem to be getting any fire. it just turns over but won't start. i tried starting fliud but it just turns over without any outragious internal noises.

Posted by on

  • SurveyorT100 May 11, 2010

    Is it getting fuel or do you normally have someone in the passenger seat? Check the inertia swith(fuel cutoff). There is a lable under your hood that explains if vechicle does not start. On the passenger side kicker panel there is a button that if accidently kick can turn your fuel off. Check that also, happens all the time to Ford owners.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

If it's not getting fuel check the interia switch. There is a label under you hood that explains "If vehicle fails to start". The switch is on the passenger side kicker panel behind it. If it accidently getting kicked by a passenger it can turn the fuel pump off. Just check it happens all the time to Ford owners.

Posted on Feb 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Ford Ranger won't start.


Check the igntion signal to the starter solenoid.

Oct 10, 2012 | 1998 Ford Ranger

1 Answer

1985 ranger 2.8 won't start. Doesnt seem to have fire.


In the case of no spark you should check for power to the coil, Have the ignition module tested. Autozones can do this and its free.
Also make sure no vermin has chewed on any wires.

Oct 07, 2011 | 1985 Ford Ranger

1 Answer

I have a 1998 Ford Windstar. Got in to drive, turned the key to start and 'snap' something seems to have broke within the ignition lock cylinder... all of the accessories are on... the key...


This happened to to me with my ranger. I went and bought in ignition and a junk yard and no problems after that. That way your not out of a lot of money.

Jun 02, 2011 | 1998 Ford Windstar

1 Answer

2002 Ford ranger starting


I had a similar problem with my old 1996 Mercury Sable. Turns out the problem was the Ignition switch was shot. Replaced it, problem solved.

That would be the next thing to check.

Mar 04, 2010 | 2002 Ford Ranger Regular Cab

2 Answers

My 1987 ford ranger won't start. It turns over when I try to start it, but I can't seem to get it to run. All the fluids seem to be filled. Could it be the fuel pump, or a fuse?


try some petrol down the inlet manifold ,if it fires then look for a fuel problem ,if it doesnt fire then look for an electrical problem with teh electrics

Dec 21, 2009 | 1987 Ford Ranger

2 Answers

1998 ford ranger, number 3 cylinder mis fires.


I would think its in the coil pack and I would change it out.

Nov 29, 2009 | 1998 Ford Ranger SuperCab

1 Answer

I have an 84 ford ranger engine turns but won't start when key


the best thing to check is fire gas air if its got all that is got to fire

Oct 22, 2009 | 1984 Ford Ranger

1 Answer

1998 ford ranger ignition problem


Do a basic check of the ignition system if you have a cap and rotor take the cap off and take a look.make sure the coil wire is not burnt,remove it and look.but more than likely the ignition control module is bad.you can scan the computer for codes and that might get you closer.hope it works have a good day DB

Feb 14, 2009 | 1998 Ford Ranger SuperCab

1 Answer

86 ford ranger not running


check the fuel pressure for the fuel pump first

May 27, 2008 | 1986 Ford Ranger 2WD

Not finding what you are looking for?
1998 Ford Ranger SuperCab Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...