An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: fuel filter replacement
Hello yes there is by the way it is located behind front splashshild you can go to a local auto parts store and buy one for under $5 bucks besure that you unhook your neg battery cable from battery before doing this repair and becareful eye protection gas is under pressure thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Should be mounted under the van in front of the gas tank. You may need a special tool to release the clip and unlock the line to remove. The tool is available at the parts store where you buy the filter. Don't forget to release the fuel pressure before removing the filter.
The fuel filter is located underneath the vehicle, drivers side on the inside of the frame rail. You will need a special tool to disconnect it and the fuel is under pressure. The pressure should be released and safety glasses should be worn. Good Luck.
release the pressure firs like take gas cap off there are some speacil tools called quick release tools some people just use a small screwdriver to pop it off it should be on driver side by the drivers door under neath the car if its a four door this driver door im talking about
It should be right under the van on the passenger side. It comes with 3
lines that are part of the filter. Do not try to remove them at the filter.
You will probably need special fuel removal tool to detach the clips.
This special tool is available at your local auto parts store. Ask your parts expert what size you will need. The tool is fitted around the fuel line and pushed into the fitting on the filter. Make sure you relieve the fuel system pressure before proceeding.
it takes a special tool to disconnect these lines. go to your local auto parts store and ask for the fuel line disconnect tool.once you have the tool put it on the fuel filter prong that the fuel line is connected to and slide the tool up into the gas line, at the same time pull the line away from filter. you may half to try this several times.also when the tool slides up into the line twist the line and push in and out. in short thare is a spring up in that line that gets stiff and corroted so moving the line around while the tool is in place helps free up this sprind.also spray a little lubracant in the ends of the lines before beginning.
YOU NEED T INSERT THE SPECIAL TOOL WICH RELEASES THE RETAINER INSIDE THE BULGED OUT PART OF THE LINE. TRY NAPA FOR TOOL NO.
NAPA Service Tools WATCH OUT FOR FUEL THAT MAY SPRAY OUT WHILE DISCONNECTING! GOOD LUCK