Question about 1997 Chrysler Sebring

2 Answers

Fog lights not working on 97 chrysler sebring

Why aren't my 97 chrysler sebring fog lights not working i took it off and hooked it direct to the battery it work but not on the car and I could not locate a fuse for it in neither box

Posted by on

  • Anonymous Mar 24, 2014

    ABS light remains on, gauges don't work, car shuts off immed. after starting

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 27 Answers

Have 2000 Sebring with same problem. Pulling the foglight switch Really hard like other post didn't work. So I put power to the yellow wire straight from 10-pin connector And they came on, Power wires are the two middle ones by the pin release side,so I replaced turn signal switch. Cost about 50 bucks. Still didn't work. I bent the connectors on the plug so they would be tighter and now have lights. Hopfully this saves you 50 bucks

Posted on Aug 29, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 107 Answers

Check switch continuity and relay , might not have a fuse , also the fog lights on any car will shut of when headlights are switched to high beam

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Chrysler Sebring just had battery changed now i have no headlights or fog lights, but I do have parking lights and tail lights. any thoughts


If everything was working before the battery change, whoever did the work broke something, disconnected something or did something else to cause the problem. Goo back to whoever changed the battery.

Jan 01, 2014 | 2006 Chrysler Sebring

1 Answer

How do you change the fog light bulbs


Most Fog Lamps are changed from under the car
& reaching up behind the front bumper facia to remove
the lamp holder/socket

They aren't cheap

Jul 24, 2012 | 1996 Chrysler Sebring

1 Answer

1999 chrysler sebring. fog lights dont work. bulbs are good


first check the fuse for the fog light if that is good check for a bad or loose wire or the sockets are bad or the switch for the fog light is bad give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local Chrysler dealership in the parts department and they be able to print you off pictures and diagrams showing you how they should work wish you the best of luck Michigan Man.

Mar 03, 2010 | 1997 Chrysler Sebring

1 Answer

1996 sebring convertible jxi can't get my fog/driving lights to come on. suggestions???


if the fog light switch light up,good chance the fog light bulbs are blown out.if the switch does not light up,check fog light fuse

Nov 21, 2009 | 1996 Chrysler Sebring

1 Answer

Fog Lamp Bulb Replacement


there are a couple of screws in the front of the fog light that will remove the lense so you can replace the bulb.

May 11, 2009 | 2004 Chrysler Sebring

1 Answer

Fog lights are not working. I have no power to the violet/white tracer wire to multi-function switch. Where would this wires power source connection be? [If I power up green wire/pink tracer; fog lights...


The lower Fog lights to my 2003 Chrysler Sebring Conv LXi do not work. And I do not have an owners manual to look at what fuse is what in the relay center near the engine. There are bulbs there in tact on the front ground effects. But they do not come on ever.

Sep 22, 2008 | 2004 Chrysler Sebring

2 Answers

Driving lights on chrysler sebring convertible


The roatating knob that turns on the headlight pulls out to turn on the fog lights, but only pulls out when the headlights are on,

Aug 15, 2008 | 2004 Chrysler Sebring

1 Answer

Car broken into. Took it to chrysler dealership because, the steering column was broaken and convertible top was cut. Fog light was on the multifunction switch before they replace it with a used one. The...


call the manager of the dealership and demand answers tell him your unhappy and tell him you will contact chrysler re this problem if its not rectified . ok good luk

Jul 19, 2008 | Chrysler Sebring Cars & Trucks

Not finding what you are looking for?
1997 Chrysler Sebring Logo

688 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

69199 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...