Question about 2000 Jeep Grand Cherokee

1 Answer

99 jeep grand cherokee left turn signal quit working

The turn signal quit working and i ordered a new switch and it still didn't fix the problem .the flashers work so i know all the bulbs are good i can't seem to pinpoint what is wrong.

Posted by on

  • FlyByNite79 Mar 04, 2009

    While trying to find the steering wheel radio controls wire for an aftermarket kit on my 2000 Jeep Grand Cherokee I was no longer able to use the turn signals. The hazard lights work fine, but I'm not even getting a clicking from the relay with the turn signal switch. I have checked the connector and will take a ohm meter to the switch itself tonight, but I'm at a loss on this one. Other issue is the backup lights are no longer working either. My overall suspision is it the bulbs might be crossed (single poll to dual poll) after my friend examined the tail light housing, but this still does not explain the turn signal issue. /me = stumped.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

First I recommend making your own "power flow chart" Make a simple diagram of the directional system as you know it to be. Then, using that chart, take voltage readings and use a test light at each point you check.(write down results on chart) On the power side, you should get a 12v reading and have a bright light on test light. On the "flash" side, you should have 12v and bright light pulsing. I like to work from both ends in... that eliminmates stuff like starting at the front and finding the problem all the way at the back. Make sure you have a good ground everywhere. If in doubt, either re-ground body or while testing, use a seperate long ground wire from the battery connected to test light or meter.Make sure all appropriate fuses are good. Use power in, power out test on all plugs, junctions and sockets.
It sounds complicated but it's not.
Good luck

Posted on Feb 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Jeep Grand Cherokee The Left Turn Signal Works Sometimes And Not Other Times


does the turn signal switch feel as if its not engaging when this happens ?if so i'd say the switch mechanism is worn so have to be replaced as no repairs are available

May 14, 2014 | 2002 Jeep Grand Cherokee

1 Answer

Left turn signal stops working


Had simular problem with wife 2000 Jeep Cherookee.
My signal light were not working at all.Check flasher relay under steering colum

Nov 28, 2012 | 2000 Jeep Grand Cherokee

1 Answer

My left turn signal wont work in my 2001 jeep grand cherokee


IF LEFT TURN SIGNAL BULB GOOD.TURN SIGNAL SWITCH COULD BE FAULTY.

Dec 06, 2010 | 2001 Jeep Grand Cherokee

2 Answers

All turn signals on my jeep cheroke laredo are not working. Is the problem a bad fuse??


COULD BE BLOW FUSE.FAULTY TURN SIGNAL SWITCH OR FAULTY TURN SIGNAL FLASHERS WHICH IS LOCATED FUSE / RELAY BOX JUST LEFT OF THE STEERING COLUMN.

Dec 05, 2010 | 2003 Jeep Grand Cherokee

1 Answer

Bulbs are good new switch still no left turning signal on a 99 jeep cherokee


there is a flasher relay in the fuse box probably blown out there may be one for each side. if there is only one and the other side turn signal is working thats not it. check the ground wire for the light it may be frayed or broken cause an open circuit. or the light ballast may be bad see if you can buy one from a salvage yard to save money/eliminate that as a cause. i hope this helps

Nov 04, 2010 | 2001 Jeep Grand Cherokee

1 Answer

Left signal not working nor does the green arrow


PROBLEM WITH THE CURRENT CABLE SIR. THANKYOU

Jan 03, 2010 | 1993 Jeep Grand Cherokee

2 Answers

Turn signals hazards flasher don't work jeep cherokee replaced combination flasher relay, turn signal switch and still no signals


I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING

Sep 27, 2009 | 1999 Jeep Cherokee

1 Answer

2001 Jeep Grand Cherokee- Turn Signal


Does left / right turn signal work. Either/Or. Probably the switch at the bottom of the indicator "stalk". Big $$$

Feb 27, 2009 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...