Question about 1997 Chevrolet Lumina

1 Answer

Need radio code vauxhall astra 2000

Old battery replaced radio now says safe and asks for 4 digit code

Posted by on

  • 4 more comments 
  • jdwbsw Feb 28, 2009

    pulled old battery and did engine work...

    installed new battery and now the radio shows "loc" on display..



    radio is locked out ..



    need the 4 digit code to re in act the radio.



    please advise



    jdw

  • Anonymous Mar 16, 2014

    how to reset code 82 on vauxhall astra

  • Anonymous Mar 16, 2014

    got error code u0001 on a 04 Vauxhall astra

  • Anonymous Mar 23, 2014

    cable seems stretched and needs replacing

  • Anonymous Mar 25, 2014

    need code for radio

  • Anonymous Mar 28, 2014

    Discontented the battery the radio needs a code to restart

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 184 Answers

Could you tell me the make of unit in car & could you get the serial no. & part no. for unit it means having to take out thanx.

Posted on Feb 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vauxhall meriva wont start after changing flat battery.the message safe is showing on dash board


Make sure ignition is switched on, hold down button AS and turn on the stereo. Wait for the beep, then release button AS. Display should now have 4 dashes ----. Enter correct code using the radio preset buttons 1 to 4. Once code is entered, press and hold down button AS again until code is either confirmed or denied. WARNING - you only have a max of 10 attempts to get it right, but if still no luck after the 8th attempt, STOP and contact a Vaux dealer.
or you could buy something from these folks:
http://www.m-99.co.uk/Car_Radio_Decode/car_radio_decode.html
Car radio code calculator Decode Serial Digital mileage adjustment...

Feb 06, 2015 | Vauxhall Cars & Trucks

1 Answer

Radio not working golf gti mark 4


If factory installed put on radio.The safe sign will appear.There should be a 4 digit code for the radio.Punchin the code using numbers 1-4.Press repeatedly from number 1 till for the fist digit number 2 for the second digit etc.when you have punched the code in the safe sign will appear.Briefly press loud /expert then wait a few seconds your radiio should then display .Look for your favourite channels .If you punch in the code wrong there is a waiting period.First attempt wait 21 seconds ,second attempt1.5 minutes 3rd attempt5.5 minutes...4th attempt22 mins.5th attempt1.5 hrs. If this fails ,disconnect battery and start again

Aug 11, 2014 | 2000 Volkswagen Golf

1 Answer

How do i unlock my radio on my astra when it says " panel safe"


you need the 4 digit code for the radio. sometimes you luck and it is still on the radio top but you need to take it out to find out if not it may be in the radio manual been written down falling that you need to know if it is the original radio for the car if it is you can get a car pass from vauxhall and it will have the code for the radio ecu alam etc. then but its can cost a bit but is a good idea to get the code.as after awile you may need a new ecu or somthing and the code will help pair the systerms.

Mar 03, 2013 | Vauxhall Cars & Trucks

1 Answer

RENAULT LAGUNA 51 RADIO CODE


To get your Radio Code Mr JEFFERSON, as it had happened to my customer with a Vauxhall Astra is to apply to main Dealer by giving the Registration or Chassis Number and as I remember He paid in Cyprus the amount of 17 euros and he gets it. I do not believe is very expensive. When you get the Code write it and keep it somewhere safe for future use.

Aug 17, 2012 | Renault Laguna Cars & Trucks

1 Answer

In my 200 vw beetle tdi, the radio will not turn on. the fuse is good for the radio, so what else should i try


You need to remove the radio out from the dashboard using special removal VW radio Gamma keys. In the rear face of the unit is placed a fuse (red color) = 10 Amp. Replace blown fuse with a new one. Then you will need to exit the radio out from the security "SAFE" mode.

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from an Volkswagen dealer!


You can find the radio code at: http://www.radio-code.co.uk/
tdisline_701.jpg
The sequence of programming for a 2000 VW Beetle radio Gamma is:
1. Push simultaneous "SCAN" and "RDM" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDM" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDM" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready for use!

Jun 29, 2011 | 2000 Volkswagen Beetle

1 Answer

I changed my battery on my Audi A4 2000 2.4 the radio now shows safe mode. I got the code in my manual(written down by previous owner) but cant remember what the procedure is ?


The sequence of Audi radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.

For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

Apr 26, 2011 | 2000 Audi A4

2 Answers

My vauxhall astra engine is reving on its own at


have you had it on diagnostic machine cos i did with mine and ended up being the EGR valve?

Sep 26, 2009 | 2001 Ford Super Duty F 450

4 Answers

How do I reset my ml320 stereo code


what is radio code 4 a 2000 mecedes ml 320

Sep 09, 2009 | 2007 Mercedes-Benz ML320 CDI

2 Answers

Vauxhall astra 53 plate roof wont open just keeps bleepin


the astra convertable is prone 4 this problem take it to vauxhall there is a rework and it wont cost u a penny!!

Apr 19, 2009 | 1995 Saab 900

Not finding what you are looking for?
1997 Chevrolet Lumina Logo

Related Topics:

468 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...