Question about 2001 Daewoo Lanos

1 Answer

Matiz fan blowers intermitent

My mum has a matiz the heater blower only comes on when it feels like it the works fine for a little while then stops again we tried changing fuses. we can hear a clicking sound when we turn on fan if we have our head obner the bonnet but cant find were it is coming form any ideas please??

Posted by on

  • MERYL SMITH Feb 14, 2009

    yes the radio and rear screen heater are not working either



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 15 Answers

Does the Radio switch off with the fan

Posted on Feb 14, 2009

  • THEJET Feb 14, 2009

    sounds like it could be an earthing problem where the wiring loom connects to the chassis



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Heater blows no heat

  1. check to see if you have voltage to your blower motor with key on and blower motor switch selected to a speed setting
  2. if you have voltage, then your blower motor is faulty
  3. no voltage means that you have a blown fuse, bad relay, bad fan switch, or bad blower motor resistor.

Dec 10, 2013 | Cadillac Eldorado Cars & Trucks

1 Answer

1998 jeep grand cherokee laredo blower motor work for awhile and quits

If your car is moving when it does this, check that the wires are on tight to the blower motor.

Apr 17, 2013 | 1998 Jeep Grand Cherokee

1 Answer

1996 Chevy K1500 4x4 extended cab. Heater just stopped. Fuses seem fine. Blower fan works on all speeds. Whadaya think happened?

If the blower works, but no heat comes out, and the heater hoses are both hot, it could be a problem with the blend door under the dash or the HVAC control module.

Jan 28, 2013 | Cars & Trucks

1 Answer

1999 suburban front blower stopped working

More than likely your blower motor resister went bad, that is what regulates the fan speeds

Dec 05, 2012 | 1999 Chevrolet Suburban

3 Answers

I have a 95 Ford Contour 6 cyl DOHC, we had ice accumulation last night and stated car ealy this morning and defroster worked fine, ran about 15-20 minutes and it was too early to leave so we shut car off....

the fan may have went out. what your feeling is air coming in as you drive. ford trick for fresh air lol. the fan needs to be tested to see if it has stopped working

Jan 20, 2011 | 1995 Ford Contour

1 Answer

A/C & heater blower will not work. Was running fine. Stopped at a store and it would not come on. I can feel cool air but no blower. I cannot figure if it is a fuse or the fan. I can't even find the...

Blower is over the passenger's feet. Pull down insulating panel, and you should see it. Pull off connector and check for voltage in cable with ignition on and fan set to high--should be 12-13 volts. If you have voltage, replace motor. If not, troubleshoot fuses/relays, switch, and resistors.

Sep 03, 2010 | 2002 Buick LeSabre

1 Answer

Kia Rio - Heater not working fan works but noise coming from fan.

open glove box and make sure that none of the papers from that can get down to blower motor

Jan 17, 2009 | 1998 GMC Sierra

2 Answers

Blower for AC/Heater stopped working

if you can reach the blower motor, it could be a worn out carbon brush of the blower motor. if they are, buy a set of carbon brush, learn how to replace them and it would be back running in no time. by the way, when you pull out the carbon brush holder, make sure you dont interchange the position. you can put them back wards and what would happen is the rotation will be reversed. either you reversed the carbon brush holder or just simply interchange the wires that are coming to the motor. i hope i was able to help...

Jul 07, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2001 Daewoo Lanos Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

77932 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8832 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides