- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
why did you add oil, without checking what the light says?
only light that blinks is the maint, required light, it tells you that you need to change your oil, then you need to reset it, follow your manual to reset
1. To reset MAINT reminder light after engine oil replacement, turn ignition switch to OFF position with odometer reading showing. Turn ignition switch to ON position while holding down trip meter RESET button. 2. Hold trip meter RESET button down for at least 5 seconds. Odometer should indicate "000000" and MAINT reminder light goes out.
The maintenance required light lets you know its time for an oil change. Once the oil is changed the light can be reset. The light will usually blink for a few seconds as you approach the 5,000 mile mark and then stay on steady as the 5,000 mile mark is reached or surpassed.
Its for an oil change and the way you reset it is put the trip on odometer hold the trip odometer button and turn the key to the on position and lines will blink in the place the numbers should be then it will go off
FIRST press and release the setup button to display oil life= xxx then press and hold the reset button for about 2 sec it should then display oil life set to 100%
Just pressing the reset button when the change oil light comes on while driving will not reset the computer
That is for oil changes. It come on when the oil change is due.
When you have your oil change done, the lube tech should reset the this light every time.
If you need help resetting the light, let me know.