Question about 1996 Chevrolet K1500

2 Answers

My chevy z71 96 running lights work, but not right brake/blinker

My 1996 chevy silverado z71 has power to running lights
, but not to the right brake or blinker or emergency signal. I recently changed all the bulbs but it still would not work. My right reverse light also works. I checked the connection behind the plug and i had power to the blue wire only when the running lights were on, not while the brake or blinker were being used.

Posted by on

  • pedroluna Feb 25, 2009

    I ended up cleaning the plug, and it worked after wiggling the bulb a bit while connected.

  • hunnicuttz May 09, 2009

    I am having the same problem on my 95 z71 and mine would work for a little while and then go out and then start working again later but now it is completly out.



    I have power at the left light but not the right. I think the problem is the wiring harness. Where can I get a new wire harness for the right side? Can someone send me a link to one please :)

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

If you have factory tow package there is another fuse box under the hood and you will find small fuses that control right and left blinker and tail and brake lights for factory wiring harness for tow package you will also find what fuse is what in the owners manual for tow package fuses hope this helps

Posted on May 31, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Check for a short it could be anywhere in the line

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 2003 model 2500HD Silverado, the right tail light doesn't illuminate, although the brake light actuates normally. I have the right blinker function and the back up light also works. I had power...


In those years of chevy trucks they have circuit board in the tail light assembly. You will need to replace the circuit board ( the thing the bulbs push into) you can perchase one at your local auto parts store.

Jul 08, 2011 | Chevrolet 2500 Cars & Trucks

1 Answer

Brakes Lights dont work on a 2006 Chevy Silverado


I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

Jun 22, 2010 | 2003 Chevrolet Tahoe

3 Answers

Have a Chevy Corsica 1996. Blinkers not working right. When I step on brake the arrow on instrument panel for the right blinker lights up. When use left blinker, both flash like the flashers are on. ...


It sounds like a bad light socket. The brake light and the parking/running/regular part of the socket are shorting out. When you press on the brake petal it's shorting out on the turn signal and sending current to the indicator (arrow) on the dash.. When you use the blinker, it's shorting with the brake light and causing them both to flash...

Check the socket and get back to me with the result.

Mar 14, 2010 | Chevrolet Corsica Cars & Trucks

1 Answer

Brake lights on a 2003 chevy silverado 2500HD wont work.


same bulb but 2 seperate elements. wiring diagram u should be able to obtain from your local auto parts store like autozone(preferred)

Sep 23, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

I have no brake lights


replace brake light switch and replace reverse bulbs.

May 23, 2009 | 1996 Chevrolet C1500

1 Answer

1995 chevy silverado z71 no power to right tail light


check fuse.if good you got grounding problems or faulty turn signal switch.

May 09, 2009 | 1996 Chevrolet K1500

2 Answers

Left signal not working


the blinker is behind o next to the brake pedalit coul be the problem brake ligth swich is ataached to bhe brake pedalhold by two screws o pins first check for groud o positive

Jan 11, 2009 | 2002 Chevrolet Silverado 1500HD

Not finding what you are looking for?
1996 Chevrolet K1500 Logo

753 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...