Question about 2002 Saturn L-Series

Open Question

Dash lights flicker warning lights flash off and on

Change oil light cannot be reset high beam indicator comes on when car is started. on a 2002 saturn L300 series

Posted by on

6 Suggested Answers

stormbrewin
  • 426 Answers

SOURCE: High-beam indicator does not work

Sorry but the gauges have to be removed to replace the globe.Not the whole dash though,just the gauge surround and gauges only have to be pulled out far enough to get your hand in to change the globe.Good luck

Posted on Nov 11, 2008

heavymetal77
  • 721 Answers

SOURCE: High beam headligts will not come on + no dash

Sounds like a bad switch to me. If it was a relay,it would not work period.Not to mention, the switch controls the dash lights too.

Posted on Jun 22, 2009

emissionwiz
  • 60683 Answers

SOURCE: 2002 Saturn L300 High Beam Problems

u are going to have to replace the turn signal switch to correct this.

Posted on Aug 07, 2009

  • 7353 Answers

SOURCE: The high beam lights on my 2002 saturn sl will not

the hi-lo beam switch may be bad

Posted on Oct 14, 2009

  • 2 Answers

SOURCE: 2001 Windstar headlight problem

I also have the same problem and have now given up on this Dog that Ford calls a vehicle. Just another crappy Ford product. Im going foreign for now on - and Im in the military!

Posted on Oct 31, 2009

ZJLimited
  • 17970 Answers

SOURCE: where is the inerta switch on a 2002 L300 series

On vehicles equipped with an automatic transaxle, a neutral safety switch is mounted on the rear side of the transaxle bell housing to prevent starting the vehicle unless the shifter is in NEUTRAL or PARK . If the switch is suspected, check it as follows:

  1. Detach the electrical connector from the neutral safety switch that contains only 2-pins. These should be terminals A and B .
  2. With the transaxle in REVERSE , 3RD or 2ND , measure the resistance of the switch across terminals A and B ; the circuit should be open (infinite resistance).
  3. With the transaxle in PARK or NEUTRAL , the resistance across the two switch terminals should be less than 2 ohms.
10_15_2011_2_28_51_am.gif

Fig. Electrical schematic for the starting/charging system (CLICK HERE for zoom)

Hope this helps; remember to rating this free answer.

Posted on Oct 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Indicators, headlight, high beam, Heater showing strange behavior. Can you please suggest what could be the possible reason for it . BCM or Multi Function switch?


Hooking up an OBD2 reader will tell you right away if the BCM is shot or BCM. Take it to advanced auto or O'Riley's they will hook up a an OBD2 reader and tell you. Sounds like a faculty PCM and BCM to me or just faulty PCM since you've replaced the Body Control Module already.

Feb 20, 2015 | 2008 Hyundai Elantra

1 Answer

Aztek high beams come on when right blinker is on


Your blinker arm control unit is bad have it replaced it will cure your problem. What it is doing when you turn on your blinker the unit has a short in it and causing the high beams to come on. As they all work of off the same controler.

Feb 18, 2014 | Cars & Trucks

1 Answer

When i started my the blue high beam light flickered for awhile and then turned off , then the head light automatically would not come on only manually.Now the tail lights will not shut off! I disconnected...


Not knowing the year make or model car i can only guess here, but it sounds like the switch may be bad, try unconnecting the connector from the switch and see if the tail lights shut off, the flickering high beam indicator may be due from a faulty switch or high beam relay but if all works manualy i dont think its the relay.

Oct 04, 2010 | Chevrolet Prizm Cars & Trucks

1 Answer

On a 2001 ford taurus what is the exclamatin point on the dash? The light comes on and goes off at times.


Hope this helps.
df697aa.gif


Item Part Number Description 1 — Instrument cluster 2 — Odometer reset shaft 3 — Air bag warning indicator 4 — RH turn signal indicator 5 — Charging system warning indicator 6 — Tachometer 7 — Low oil pressure warning indicator 8 — Brake system warning indicator 9 — Cruise control indicator 10 — Check fuel cap indicator 11 — Anti-lock brake system (ABS) warning indicator 12 — Check transmission indicator 13 — Odometer 14 — Transmission range selector indicator 15 — Trip odometer 16 — Theft indicator 17 — Low coolant indicator (if equipped) 18 — Safety belt warning indicator 19 — Low fuel warning indicator 20 — Fuel gauge 21 — Malfunction indicator lamp (MIL) 22 — Door ajar warning indicator 23 — Traction control indicator (if equipped) 24 — Engine coolant temperature gauge 25 — High beam indicator 26 — LH turn signal indicator 27 — Speedometer

Jun 05, 2010 | 2001 Ford Taurus

1 Answer

2002 Aztek Service engine light on & high beam indicator flashes


The high beam light flashing means you have a high beam burnt out. It flashes when you put it in gear because your high beams actually double as your daytime running lights, only on a lower power.

Dec 17, 2008 | 2002 Pontiac Aztek

1 Answer

High-beam indicator does not work


Sorry but the gauges have to be removed to replace the globe.Not the whole dash though,just the gauge surround and gauges only have to be pulled out far enough to get your hand in to change the globe.Good luck

Nov 11, 2008 | 2003 Toyota Camry

2 Answers

2001 Windstar headlight problem


You probably have a frayed wire leading from the main cable to the headlamp.  Look closely where it may be touching the frame and see if you have any wear etc.

Aug 14, 2008 | 2001 Ford Windstar

Not finding what you are looking for?
2002 Saturn L-Series Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...