Question about 2005 Honda Accord

1 Answer

Hepa filter how to replace hepa filter of 2003 Hond Odyssey.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert whose answer got voted for 20 times.

  • Expert
  • 49 Answers

Remove the glove box.
Cut the plastic cross brace in the glove box opening with diagonal cutters in the area shown, and discard it.
hepa filter - df0f6a2.jpg Remove the bolts, the screws and the glove box frame.

  1. Remove the filter lid (A) from the evaporator, then pull out the dust and pollen filter (B).
  2. Install the filter in the reverse order of removal. Make sure that there is no air leaking out of the evaporator.
  3. Install the glove box frame and glove box in the reverse order of removal.

Posted on Feb 13, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the fuel filter located in a Honda odyessy 2003

Like most newer vehicles this one has no inline fuel filter, it does have a strainer screen of Nylon mesh in the fuel tank at the inlet to the fuel pump, it never needs to be serviced unless the fuel pump is replaced.

Feb 01, 2017 | 2003 Honda Odyssey

1 Answer

How does odyssey 2003 model behave when the gear

There is no such thing as a "gear power sensor" on Hondas. If the trans filter gets clogged, which does happen from contamination, usually from the torque convertor lock up clutch failing, the trans will feel like it's in neutral. This might occur a few minutes after moving. Trans rebuild needed.

Aug 27, 2014 | 2003 Honda Odyssey

1 Answer

How do you replace the light in a 2003 Honda Odysse clock? The digital clock works, but it doesn't light up at night

pls help me in how to replace the bulb on the clock display hond odyssey 2003. The digital still works but the light is out. Tks

Oct 12, 2010 | 2003 Honda Odyssey

1 Answer

Why does my idle fluctuate on it's own? 2003 hond...

i got told by a friend that theres a grub screw on the throttlebody that comes loose or mayb the it needs a full clean

May 21, 2010 | 2003 Honda Odyssey

2 Answers

Looking into buying a used 2003 honda odyssey with just over 100,000 miles. what maintence is required? i heard timing belt should be replaced. is this true and how much am i looking at?

For a 2003 used Honda odyssey, the following should be required:-

1. Replace the timing belt. (repair estimates at
2. Drain the whole oil out of the engine and transmission
3. Replace the brake pads
4. Most of all run a diagnosis scan on the vehicle to detect any other possible maintenance that will be required.

Good luck and a good buy.

Take care.

Apr 16, 2010 | 2003 Honda Odyssey

1 Answer

Please describe how to replace a cabin air filter for a 2003 odyssey

after you take the glove box out, (if its the first time the filter has been replaced), there is a plastic part of the dash going across the evaporator case, you will need to cut this out. and unbolt the metal brace going across, behind the glove box. Its hard to explain, but when you get the glove box off, you will see what needs to be done to get the filter out. the filter cover is a vertical panel about 1.5" wide and 10"tall. the part that you need to cut is needed when the dash is made, but no longer needed when its bolted into the car.

Oct 20, 2009 | 2003 Honda Odyssey

1 Answer

Changing the battery in the 2003 Odyssey

Product Description 12V 13.0AH
YB16L-B" height="44" alt="ODYSSEY PC545MJ
12V 13.0AH
YB16L-B" hspace="0" src="" width="70" border="0" />

**2 Year Full Replacement Warranty

4+PCS Call us: 1-800-346-0601!

CATALOG# 0770-2020
12V 13.0AH
With metal jacket

Apr 02, 2009 | 2003 Honda Odyssey

1 Answer

Glove box release so I can change the hepa filter on my 2006 Honda Odyssey

The procedure for removing the cabin air filter lists to remove the glove box housing. You usually can either ....1 empty out glove box, look and see if there are two tabs (stops) on the box part that tilts out. Often times the plastic box can be squeeze in at both sides to clear the housing. This allows it to tilt all the way down and you're off. or 2- empty out the glove box and completely remove the assembly. This requires removing 4 to 6 screws on sides and likely on bottom to pull out whole housing. Once out the rest should be very obvious.

Mar 18, 2009 | 2006 Honda Odyssey

1 Answer

How can I replace 2007 Hond odyssey tail lamps?

You Have To Remove It From Inside The Trunk The Light Bulb Will Turn And Come Out Then To Remove The Lens Unscrews From Inside As Well.

Jan 05, 2009 | 2007 Honda Odyssey

Not finding what you are looking for?
2005 Honda Accord Logo

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides