Question about 1995 Ford Crown Victoria

1 Answer

TAIL LIGHTS WORK,BRAKE LIGHTS DONT.

MY TAIL LIGHTS ARE OUT BUT MY BRAKE LIGHTS STILL WORK,HELP ME OUT

Posted by on

  • Anonymous Mar 16, 2009

    I had the same problem, I changed the switch, didnt help, all my bulbs work, I think its a wiring problem........

  • rabidchimp May 11, 2010

    tail lights and brake lights have separate bulbs. check your tail light bulbs and see if they are burnt out.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 26 Answers

You may want to check the fuse for one, and also, I have see the bulb filaments go out before at the same time, slim chance, but you may want to replace the bulbs. If that doesn't do it. Above the brake pedal and toward the driver, underneath the dash, there is a switch that is pressed when the pedal is normal, and released when you push it in. This switch tends to go bad, and will either leave the brake lights on, or won't let them come on. You can test it by pushing it with your finger, while someone is behind the car. If nothing, buy the switch, shouldn't be more than $10 or $15

Posted on Feb 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both tail lights don't work turn signal and back up lights work but no stop light and no tail lights


could be a glitch in the front power controll modual disconect the battery wait couple minuts reconect and see if thay come back
also replace the bulbs even the one on the cab your therd brake light alot of ppl dont relise its out and it will help determin if its in the tail lights or its in the brake switch if the therd brake light lights and the tails dont replcae the switch after inspecting the tail light conectores for corotion

Mar 11, 2014 | 2005 Dodge Ram

1 Answer

1996 chevrolet 1500 brake light and blinkers dont work


a bad turn signal switch the brake lights go threw the turn signal switch

Aug 26, 2012 | 1996 Chevrolet C1500

1 Answer

My tail light dont work when i turn lights on and instrument panel lights dont work either


check your fuses first and if no help fill free to contact me and we will take it from there....hope this helps and if so please rate this post.

Aug 15, 2012 | 1994 Pontiac Sunbird

1 Answer

Chevy S10. When my running lights are on everything works (except turn signals), front lights, tail lights brake lights. When I turn on my headlights turn signals still dont work everything comes on fine...


Check the grounds on your wiring.
If you have a trailer harness, make sure there are no shorts, or crusty connections

Good Luck chasing the gremlins

Oct 13, 2010 | 1996 Chevrolet K1500

2 Answers

Interior dash and running lights dont work but my signal and brake lights work else works


Look at fuse #18, a 15 amp fuse, in the fuse block. This fuse powers both the tail lights and instrument cluster lights. Usually both of these light systems are powered by the same fuse so when your cluster isn't lit up you'll know right away that your tail lights aren't working as it's not safe to drive without tail lights. Your brake, turn, and head lamps are powered by different circuits. Hope this helps and good luck!

Aug 11, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

On 2002 jeep laredo brake lights dont turn on if lights arent on


That does not make any sense. Do the tail lights work? There are supposed to be separate filaments for brake lights, tail lights, and turn signals. In particular the center brake light should not be possible to be confused with tail lights or signals. Does it come on? If not, then you probably have no brake lights at all, and that is probably because of the bad fuse or the switch on the brake pedal for the brake lights.
If there is some sort of cross over between tail light and brake lights, that is usually from a bad light socket ground; which results in current backing up from one system to another. But then each is usually only half brightness.

Jul 20, 2010 | 2002 Jeep Grand Cherokee

1 Answer

Brake lights dont work but the other tail lights do


Check the brake light switch under the dash attached to the brake peadal arm. It is wher the break booster push rod attaches. Sometimes that switch works loose.

May 18, 2009 | 1996 Chevrolet K1500

1 Answer

Tail lights dont work


Replace the bulbs.
The bulbs will have two seperate elements in it which is why the brake light works.

Take the bulbs out and you will see the seperate elements.

Jan 08, 2009 | 1995 Subaru Impreza

Not finding what you are looking for?
1995 Ford Crown Victoria Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...