Question about 2000 Chevrolet Blazer

1 Answer

RE; 2000 Chevy Blazer

How do you check fuel pressure without spending anymore money?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Get a gauge and check it at the fuel rail.

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 chevy blazer starts to putter and sounds like its running out of gas before it cuts off.i thing its some sort of valve that needs replacing....


you should have the fuel pressure tested to make sure there isn`t a problem with the fuel pump after it has been running awhile as sometimes a pump will slow down or quit when it gets hot or the volume drops off even with good fuel pressure so both need to be checked at the same time.

Apr 10, 2011 | 2000 Chevrolet Blazer

1 Answer

My 2000 chevy blazer will not start when it gets cold out and is not a battery issue


i would get a fuel line pressure tester and check the fuel pressure and when I had the same problom before it was the fuel pump getting weak and not giving enough fuel to the injectors

Dec 21, 2010 | 2000 Chevrolet Blazer

1 Answer

My 1997 chevy blazer basically, it sounds like it is miss firing runs really rough. I've replaced my plugs,wires,cap&router,fuel filter. I was told it might be fuel filter or fuel pump but i dont want...


Try checking the timing. Get a timing light, and aim at at the crank marks. If they are jumping around, your chain may have jumped a cog, and will need to be replaced. Let me know what you find out.

Sep 23, 2010 | 1997 Chevrolet Blazer

1 Answer

1997 Chevy Blazer wont start without starter fluid


Check fuel pressure it could be low regulator pressure

Jun 28, 2009 | 1997 Chevrolet Blazer

1 Answer

Chevy Blazer won't start; fuel pump needs replacing


Before spending several hundres on a fuel pump, I recommend doing a fuel pressure test. You can get a test gauge pretty cheap at a parts store. If the pump is junk, you raise the truck, lower the fuel tank, unplug the electronics from the pump at the top of the tank, then with a hammer and flat head scrwedrive, gently tap the lock ring in a counter clockwise direction until it pops off. Pull the pump assembly out and install the new one. Reverse directions to install.

Jun 02, 2009 | 2001 Chevrolet Blazer

1 Answer

I have a 2000 Chevy Blazer I have replaced


maf sensor, tps sensor,or timing gear

Apr 16, 2009 | 2000 Chevrolet Blazer

1 Answer

2000 Chevy Blazer Cranks but wont start...


What about the fuel filter????? Have you changed it out??? If you can spary something like a started fluid, that means it is a fuel problem. My last check, it has to be above 50-psi on the fuel pressure to make it run right. I had 35psi, but whould not get over 30mph or down hill maybe 45mph. Check both filter & pressure, but check pressure with a New fule filter!!!!

Jan 18, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...