An expert who has achieved level 3 by getting 1000 points
An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
An expert that got 20 achievements.
An expert that got 10 achievements.
Re: indicators on peugeot 406
U mean the turn signal switch, never heard it referred to that way, at least here in the US, anyway have u replaced the turn signal flasher?, that is the electrical device that actually makes the lights blink, it is separate from the 4 way flasher, U will most likely ask where it is, I have no answer for that, post that question on a new thread and maybe some other expert can answer it for u.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if there is no air movement check the fuses as the one for the fan might need replacement, if there is air movement but it is not cold then you may have lost gas from your aircom system which will need to be replaced by a specialist.
Hi,just reading with interest" Ianhende's" problem with his 406, I have the same sort of problem with a 2002 406 hdi (110) i.e hazards going off,plus central locking turning on & off whilst driving. have replaced battery, the mechanic is thinking that it is to do with a faulty door lock, any ideas out there ????
If you can flash it should not be a fuse problem, but check the fuse in any case.
You need to get a car tester and test the wirings to understand where the contacts get interrupted.
Start testing from fuse box to switch on instrument panel, if there is no voltage in there, that means that either there is a lose wire/connector, or the light switch on the instrument panel it is bad.
hi there all u need to do is hold on reset button just under mileage clock with the ignition off,then switch on ignition to second turn and you will see mileage clock count down from 10 but keep button held in untill countdown finishes and thats it.