Question about 2003 Bentley Continental GT

1 Answer

Bentley Continental Fluying Spur service display reset v12 '2004-

Is it possible to reset the display without tools.
I press and hold the trip button, then switch on the key and the display shows service reset, but then I don't know what is the sequence to reset it

Posted by on

  • Anonymous Feb 26, 2009

    Hi I have a 2005 Continental GT and I am in Honduras no real service here. How can I reset the tire air monitoring system failure light? Thank you

  • Nick Dendy Jun 26, 2013

    did you find a solution? I have the same problem and cannot fix it

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

The real repair is to have the vehicle serviced by a Bentley dealer. The other option is as follows...Press and hold the trip button / While doing this, turn the ignition key into the on position / Let go of both, and you will see the words "service reset" on the drivers instrument panel screen / Now press the silver knurled roller switch "OK" on the right side of the steering wheel controls, by the menu button. This will confirm the request.

Posted on Feb 21, 2009

  • rodi patel
    rodi patel Oct 21, 2014

    does anyone know how to on 2012 contintntal

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Finding a manual on how to fix air suspension on a bentley flying spur


Information might be available on the Bentley website if they will allow you access.

I suspect the suspension was probably bought in and repair instructions might be available from the manufacturer or from other vehicle manufacturers fitting that system.

Jun 01, 2016 | 2009 Bentley Continental Flying Spur

Tip

Ford-Lincoln service light 1988-01


LS

2000-01

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the STATUS control to access the System Check mode. Press the RESET button to display OIL LIFE _% RESET FOR NEW. Press and hold the RESET button until OIL LIFE IS 100% is displayed.


Mark VIII


1993-97

When "CHANGE OIL SOON" or "OIL CHANGE REQUIRED" is displayed on the Message Center, turn the ignition on. Press and hold "OIL CHANGE RESET' or the "RESET" button until "OIL LIFE RESET TO 100%" is displayed on the Message Center.


Continental


1989-94

When "SERVICE" is illuminated, on the Message Center, press the "SYSTEM CHECK" button on the right of the display. Then press the "RESET" button. The "SERVICE" symbol and mileage will start to flash. Next, press the "SYSTEM CHECK" and "RESET" buttons at the same time. The display will show "7,200 miles/11,580 km" and will count down from there as long as the buttons are depressed. Release the buttons at the desired service interval.


Continental


1988

When "SERVICE DUE" is illuminated on the Message Center, press the "CHECK OUT" button located below the display. Then press the "RESET" button. The display should now read "SERVICE DONE?" Next, press the "CHECK OUT" button and "RESET" buttons at the same time. The display will show "7,200 miles/11,580 km" and will count down from there as long as the buttons are depressed. Release the buttons at the desired service interval.







on Dec 07, 2009 | Ford Lincoln Continental Cars & Trucks

1 Answer

How do I check transmission flued in a 2006 Bentley flying spur


With a Bentley you would take it to the Bentley dealership :>)

Lift the hood and look for the dipstick. There is one for the engine and one for transmission which normally has a clip to hold it down.

For the reason I stated first, there are no videos except for Continental.

http://www.bing.com/videos/search?q=2006+Bentley+flying+spur+checking+transmission+fluid&FORM=HDRSC3

Apr 29, 2016 | Bentley Cars & Trucks

1 Answer

Where is the location of the air suspension compressor pump for the front suspension of a 2006 Bentley continental flying spur? Front end fails to rise.


It is in engine compartment. Follow small air tubes. Listen for buzzing sound. Pump may be out or you have an air leak

Jun 18, 2015 | 2006 Bentley Continental Flying Spur

1 Answer

How do i reset service bentley flying spur


Very easy Turn your ignition on but do not start up the car, wait for 10 seconds. Hold the trip and cancel buttons for 7 seconds Use the trip button to scroll down the menu , when you see service required, press the cancel button. Hold this down until you hear a bleep. Job done......

Apr 13, 2013 | Cars & Trucks

1 Answer

How do I reset the MAINT light


1. Press and hold the ODO reset button.
2. While still holding the ODO reset, press the IGN button twice without your foot on the brake. The display will show dashes, then zeros to indicate the service reminder is reset.
Other models follow this procedure:
1. Turn the ignition switch to off.
2. While pressing the trip reset button, turn the ignition switch to "IG-ON." Continue to press and hold the reset button until the trip meter displays zeroes

Nov 16, 2009 | 2008 Toyota Camry Solara

1 Answer

The child safety door lock can not unlock.


Please help me ! i can't find "child lock" button on the rear door of Bently continential flying spur ! Now i can't open rear door from inside car :( ! Anybody know ? help me plzzzz ! thanks alot !

Apr 07, 2009 | 2007 Bentley Continental Flying Spur Sedan

3 Answers

Need to reset service light


The dealer will not do it because the vehicle needs to be properly serviced, by people who know how to service it. The correct procedure is as follows: With the ignition key off, press and hold the trip button / while doing this, turn the ignition key to the on position / The driver's instrument panel screen will now read "service reset." / Now press the silver knurled knob on the right side of the steering wheel controls, this will confirm the operation.

Feb 02, 2009 | 2003 Bentley Continental GT

3 Answers

Need maint. light reset procedure for 01 bentley arnage.


turn key to the 2nd stage 1 being accessories. press the trip & cancel buttons together hold for about 5 to 7 seconds then dissplay will show nothing press againe immediatly for about 5/6 seconds will go into change mode car serial number will be shown where milage was then use the trip button only to navigate to the sign saying service due then hold down cancel button untill it changes coloure from green to red or visa versa then it will beep pres cancel then turn ingision off re-start car

Nov 19, 2008 | 2002 Bentley Arnage

Not finding what you are looking for?
2003 Bentley Continental GT Logo

2,116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bentley Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Kirk Augustin
Kirk Augustin

Level 3 Expert

2019 Answers

Are you a Bentley Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...