Question about 2007 Mercedes-Benz SLK-Class

Open Question

RESET SERVICE ON MERC SLK200

How do you reset service indicator on merc 200slk

Posted by on

  • davidthomas Mar 16, 2009

    I have the same proble with 2005 slk.

    Tried solutions on other sites but no luck

×

5 Suggested Answers

SOURCE: Service Alarm Reset:

1. Push AND Hold the odometer (trip/mileage) button WHILST you turn on your ignition lights. DO NOT TURN ON THE ENGINE - turn the key two or three clicks in the ignition and that should do it.
2. Whilst pushing and holding the odometer button, turn the other button (the clock button on the left) in a clockwise direction. This should reset the service indicator.
3. Turn off the ignition.

Posted on Oct 07, 2008

  • 109 Answers

SOURCE: How to reset service indicator light on 2004 audi a8

You need to take it to dealer or use a VagCom tool.

Posted on Nov 20, 2008

chain saw
  • 94 Answers

SOURCE: how to reset service light indicator

YOU HAVE 3 BUTTONS ON THE DASH (RIGHT HAND SIDE) YOU WILL HAVE ONE WITH A SPANNER (BUTTON A) AND ONE THAT HAS TWO 00 (BUTTON B).....HOLD A,SWITCH IGNITION ON,RELEASE A.PRESS B UNTIL DISPLAY CLEARS..MAY TAKE A FEW GOES BUT YOU WILL GET IT...

Posted on Feb 24, 2009

  • 20 Answers

SOURCE: reset oil service light 318ti 96

You can also take a paper clip (can mess things up, but I use it) And have it touch the 7th & 19th pin inside the service port.

Posted on Aug 01, 2009

  • 30 Answers

SOURCE: merc viano service light reset

The owner manual should give the procedure,if not the service department people will be happy to do it at no charge,only takes a moment to do.

Posted on Sep 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I RESET THE SERVICE A LIGHT


get the OBD codes raed will also reset the service light , merc dealers v epensive but any well equipt mechanic should have the reader

Oct 07, 2014 | 2012 Mercedes-Benz E-Class E350 Coupe 3.5L...

1 Answer

How to reset oil lights on mercedes C180


your owners manual can help you.it has information to reset oil service light.

Apr 17, 2013 | Cars & Trucks

1 Answer

Reset service light c240 merc 1997


Turn the key on,
press trip reset 3 times, untill service shows HOLD DOWN
WHILE HOLDING turn key off.
while off release the button and repress,
turn key back on holding down the button
wait untill service resets.
this has to be done in 10 seconds. it may take a couple tries.

Apr 26, 2012 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

How do you reset c230 2007 mercedes benz resetting the maintenance service indicator?


Try this, it is the procedure for resetting the ASSIST computer on many Mercs
1...Turn Key to position No:2 in the ignition / steering lock and immediately press AND Hold the button "000.0" (the trip reset button) TWICE within the space of 1 (one) second.

2…Turn the key to position No: 0 in the ignition / steering lock. Then release the button.
3...Press AND Hold the button "000.0" (the trip reset button) and turn Key to position No:2 in the ignition / steering lock. Keep button pressed
After about 10 seconds
the service indicator will reset and an acoustic signal may briefly sound
That should do it....Good Luck…...Let me know if it works?

Jun 28, 2009 | Mercedes-Benz C230 Cars & Trucks

1 Answer

I need to reset my mercedes 2000 s class ichange oil and need reset service B


Try this, it is the procedure for resetting the ASSIST computer on many Mercs
1...Turn Key to position No:2 in the ignition / steering lock and immediately press AND Hold the button "000.0" (the trip reset button) TWICE within the space of 1 (one) second.

2…Turn the key to position No: 0 in the ignition / steering lock. Then release the button.
3...Press AND Hold the button "000.0" (the trip reset button) and turn Key to position No:2 in the ignition / steering lock. Keep button pressed
After about 10 seconds
the service indicator will reset and an acoustic signal may briefly sound
That should do it....Good Luck…...Let me know if it works?

Jun 23, 2009 | 2000 Mercedes-Benz S-Class

1 Answer

How to reset service indicator on a 2000 E220 cdi?+ start problem


In regards to your service indicator reset, this needs to be done by the dealer using their computers.

Take it in and ask them to do this. Of course it should have been done with your last service.

With the merceds cars releying heavily on electronics, i would stongly suggest that you get it serviced, especially something that can possible effect your driving.

Keep in mind that although it's expensive to keep getting it serviced at the dealer, it will help hold the resale value.

Hope this helps,

Nathan.

Mar 30, 2009 | 2008 Mercedes-Benz Mercedes Benz E Class

1 Answer

How to reset service for E 270 cdi


Try this, it is the procedure for resetting the ASSIST computer on some Mercs
1...Turn Key to position No:2 in the ignition / steering lock 2...Press AND Hold the button "000.0" (the trip reset button) TWICE within the space of 1 (one) second and turn the key to position No: 0 in the ignition / steering lock - release button 3...Press AND Hold the button "000.0" (the trip reset button) and turn Key to position No:2 in the ignition / steering lock
That should do it....The service indicator will reset and an acoustic signal may briefly sound
Good Luck..Let me know if it works?

Nov 06, 2008 | 1999 Mercedes-Benz E-Class

2 Answers

How do I reset the maintenance warning indicator at the dashboard ?


Try this, it is the procedure for resetting the ASSIST computer on some Mercs 
1...Turn Key to position No:2 in the ignition / steering lock 2...Press AND Hold the button "000.0" (the trip reset button) TWICE within the space of 1 (one) second and turn the key to position No: 0 in the ignition / steering lock - release button 3...Press AND Hold the button "000.0" (the trip reset button) and turn Key to position No:2 in the ignition / steering lock 
That should do it....The service indicator will reset and an acoustic signal may briefly sound 
Good Luck..Let me know if it works?

Nov 04, 2008 | 2003 Mercedes-Benz C-Class

1 Answer

Fitted new brake pads to merc c220cdi,52 reg, dont know how to reset pad lining wear indicator


When you replace the brakes on a Car like this you should also replace the sensor otherwise the Worn Brake warning light is not going to switch off.

Oct 13, 2008 | Mercedes-Benz 190-Class Cars & Trucks

Not finding what you are looking for?
2007 Mercedes-Benz SLK-Class Logo

Related Topics:

1,062 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...