Question about 2000 Ford Focus

2 Answers

Need to change the globes in focus head light unit.

How do you release the globe holder

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 98 Answers

If what you mean by globe holder is the actual device that holds the bulb in place then it is not hard at all to get it to release. It should look like a weird twisted paper-clip contraption. If that is the kind that you have all you will need to do is press down on the free end and twist or push it slightly to get it to pop out. When it pops out and you put the new bulb back in press down on it to put tension on it and slide the end of this paper clip looking contraption into the slot. You should see a slot for it near the bottom..

Posted on Feb 17, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 21,981 Answers

Flick the end of the spring and pust it sideways

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake light and license plate lights won't work


All lights rely on a good connection between the globe base and the metal body of the car.
This is the cause of your problem.
You'll probably find rust in the globe holder stopping the globe from making a good connection.
You may have to replace the globe holders, but it will be worth trying to clean the rust back to bright steel.

May 02, 2014 | Cars & Trucks

1 Answer

Change front parking light


Hi, on the back of your car head light is cover to protect the globes remove the cover and you will see the head light globe and the parking light globe.

Jul 19, 2013 | Mercedes-Benz Cars & Trucks

1 Answer

Replace tail light globe holden astra 2005


remove inside black plastic triangle pieces under carpet or service flap light assembly then comes out and you now can get globes out
or some have plastic clips on side of globe holder assembly that you push out while pulling on globe holder assembly depends on what assembly you have

Jan 30, 2013 | 2004 Holden Astra

1 Answer

Where is the rear license plate light fuse on a 2007 Honda Odyssey


Your license plates work on the same curcit as your tail lights so therefore have the same fuse, if you tail lights are working and your plate lights not it isn't the fuse. check the globe and contacts where the globe and globe holder fits.

A bit of penetrating oil often does the trick.

Feb 14, 2011 | 2007 Honda Odyssey

1 Answer

Changing the brake light bulbs


Have you had a look from inside your boot? I could imagine its covered over with carpet but if you take off the boot wall/carpet and feel around you should find the wires which come out of the rear of the Lens which house the globes. Then you usually twist anti clock slightly (not a screw) to remove globe holder which has globe in it. Or there can sometimes be a wire spring holding the globe holder into the back of the lens. Im pretty sure it takes a bayonetglobe 5W. 47207.

Feb 09, 2010 | 2002 Audi A4

1 Answer

Replace headlight bulb 2006 Point


Under hood, remove large plastic wether cap from back of light, remove 3 point lug from unit, depress the rounded end of the retaining spring inside the open area,
while depressing it push it over to one side to release the pressure off the globe, remove globe, new globe will fit in only one position, be careful not to touch globes end with fingers as the oil in your skin is dtremental to its operation. assmbly is then in reverse. Good luck

Nov 20, 2009 | 2006 Pontiac Grand Prix

1 Answer

How do you change the third brake light on a tj


hi you will need a T20 screw driver and then remove the two screws that holds the lens on,then remove the lens and there will be a holder that holds the globe remove it and renew the globe

Nov 18, 2009 | 2003 Jeep Wrangler

2 Answers

How to change globe on headlight ford focus 2005


avatar3.jpg

brian_au no 1 solution is wrong.. globe is under a spring clip cover . remove cover, then unplug, then release retaining spring behind the globe. replacement is just process reversal

Sep 18, 2009 | 2005 Ford Focus

1 Answer

My break light works but my tail light does not work what could be the issue?


The brake and tail light globe are two different filiments in the one globe. One can blow but the other one can still work, I suggest that you replace the globe.

Sep 17, 2009 | 2000 Ford Focus

1 Answer

How do I change my headlight bulb


go to your parts suppler and ask for a H4 globe pop your bonnet and remove the plug on the back of your head light then remove the rubber boot paying attention to which way it cam off then you will find a spring clip unclip it but be careful not to damage its anchor point. remove old globe an throw away take new globe out of box DO NOT TOTCH THE GLASS OF THE GLOB AS IT WILL CAUSE THE GLOBE TO BLOW STAAIGHT AWAY AFTER FITTING IT handle the globe by the metle bass and fit it, refit spring clip and rubber boot fit the plugf and check the operation of the light

bingo you are done have a nice day

Dec 21, 2008 | 1999 Mitsubishi Mirage

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...