Question about 1991 Chevrolet Camaro

1 Answer

1991 camaro switch for you low and high beams

I have low beams but i can't switch to high beams. where the switch is it is apart and i don't know how it goes back together and i would like to know how so i can use my high beams

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 150 Answers

There is a metal rod that runs down the side of steering colmn and pushes on the dimmer switch. The dimmer switch is on the steering column to the left of the steering wheel. You will have to unbolt the column where it connects to the dash and rest it (the steering wheel) on the driver seat to get to the switch.. The switch is adjustable, just loosen the screws and slide it up or down to get proper adjustment.. Hope this helps.

Posted on Feb 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there any fuses or relays that are not in the fuse box on a 2002 buick rendezvousfor the bright lights


The high and low beam lights use the same power source, so if the low beams work the high beams have power.
There is a low and high beam relay controlled by the dimmer switch.
If the low beams work and the high beams don't, and the bulbs are good, check the dimmer switch and the high beam relay.

Aug 04, 2012 | Buick Rendezvous Cars & Trucks

1 Answer

I don't know how to use my low beam light on my 91


The small dot is probably for park lights, the big dot for the headlights. For low beams, pull the switch lever towards you, just a light pull, you should hear a click.

May 10, 2012 | 1991 Honda Accord

2 Answers

Low beam headlights do not work ..replaced switch and high beam bulb


try the lights with the tilt wheel in the up position. If the low beam works then, a wire has pulled out of the connector on the mutipurpose switch inside the steering column. remove the covers behind the steering wheel on the column and there is a large multi wire plug with many wires. it should be obvious which wire has pulled out or broken.

Jan 18, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

How can i disconnect the high beams because when i turn my normal lights on the high beams come on. I need to know how I can disconnect them.


there are 3 wires going to each headlamp,a ground,a low beam,and a high beam.. cut the high beam wire, and do both sides .and if you want high beams to work,wire both sides to a single throw double pole switch for the high beams to turn on and off.

Jul 22, 2009 | 1991 Toyota Tercel

1 Answer

High beam problem


no your highbeam switch has gone bad

Feb 09, 2009 | 1991 Jeep Cherokee Limited

1 Answer

High beam problem


Just to clarify, the high beam and low beam bulbs are the same bulb. It is a dual element bulb. If the bulbs and switch are known good, check the high beam relay.

Feb 07, 2009 | 1997 Jeep Wrangler

3 Answers

Fuse diagram for 91 chevy corsica


Need copy of wiring schematic for 1991 chevy corsica

Dec 10, 2008 | 1991 Chevrolet Corsica

Not finding what you are looking for?
1991 Chevrolet Camaro Logo

Related Topics:

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...