Question about 2002 Hyundai Santa Fe

1 Answer

Abs AND tcs lights are on.

Both these lights are on. I don't know if the tcs is working but the abs system is not. I can try stopping quickly on a snow covered surface and the odd feel you get on the brake pedal is not there. Feels and acts just like an older car with no abs system.

Posted by on

  • rmahaffey2 Feb 13, 2009

    thats supposed to be a 2008 model.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 141 Answers

YOU MAY NEED TO TAKE IT TO THE DEALER FOR AREPROGRAMING OF THE ABS SYSTEM

Posted on Feb 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ABS light come on when i am towing


the tcs system is detecting the weight and sway of the trailer because the load on the hitch is too much- that's the simple answer.

The ABS and TCS work together - the ABS system is what detects wheel spin and tell the TCS which diverts and/or control power.

Oct 08, 2014 | 2008 Mazda MAZDA6

1 Answer

How do you disable tcs/ abs dash lights on a Hyundai xg300. short of replacing a sensor there is nothing wrong with the car. Just need a quick inspection fix.


cant by pass problem with abs brake see lights flashing there is a problem with abs brake system need fixing could have brake failure.

Sep 18, 2013 | 2001 Hyundai XG300

1 Answer

I had my slave cylinder and clutch plate replaced. they also replaced the driver side cv axle and now the ABS and ESP/BAS and TCS lights are on. oh and my reverse lights don't turn on. Is there an


ABS problem may be related to the axle work...either a sensor was left unplugged, got damaged or is obstructed by rust. Reverse lights are on a separate system and likely, they weren't working and you just noticed. I'd have the shop that did the work check it over. If for any reason you don't want them doing that, have another shop do that and document what they found.

Mar 12, 2013 | 2007 Jeep Compass 2.4

1 Answer

ABS light comes on when stopped and restarted hot


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS, TPMS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System

Nov 06, 2012 | Cars & Trucks

1 Answer

My chysler, the adometer has stop working, abs light on. Alam light on. Why?


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module

Oct 10, 2012 | Chrysler Cars & Trucks

1 Answer

Abs & TCS-off dash lights both stay on. Pushing the TCS off switch does not help. "seem" to stop fine. Emergency brake seems to be fully off, not dragging. My wife encountered a patch of ice...


Hello: If there is a problem in the ABS it will bring on the tcs light as well. To determine what is causing the problem you need to have the ABS checked with a scanner to get the code. Then trouble shoot the components that the code leads you to. Normal braking is available with the light on but TCS is not as it relies on ABS for functioning the TCS.

Mar 04, 2011 | 2008 Saturn VUE

2 Answers

Is it still safe to use the car when the tcs and abs warning lights is on?wht is the main purpose of these two?does it makes any damage in the brake system?what is the temporary solutions on these?tried...


the TCS is traction control system and the ABS is anti-lock brake system, best guess is that you have a bad wheel speed sensor, you can drive it but if you get in a spot were you need either system like ice or snow as long as the lights are on the systems will not work, but it will not hurt anything the car just wont be as good as it could be on slick pavement.

Jan 27, 2011 | 1999 Honda Odyssey

1 Answer

I have a 2003 hyundai elantra. Both the ABS and TCS lights are on. I don`t know what to do.


This is most likely a problem in your ABS control module. Have it checked, after you check the brake pads for wear. The TCS warning will sometimes come on when the ABS brakes fail to function correctly or the pads are worn too far. This is caused by a brake not releasing as it should or if the caliper is extending too far to properly stop the vehicle. I would not delay in having this checked out as it could lead to brake failure.

Jan 02, 2011 | Hyundai Motor 2003 Elantra

1 Answer

About a week ago, having switched on and set off, all the brake warning lights stayed on, that is the ABS, TCS, TCS OFF and Brake System Warning lights. The brakes continued to work OK with no extra travel...


abs=anti-lock brake system/ tcs=traction control system ==sounds like you have a problem with ur abs possible bad sensor or a wiring connection problem when abs shuts down [trouble light] your brakes will work normal but if u stomp or brake hard the brakes will lock up skid and the tcs doesnt affect brakes but if u accelerate hard tires will spin lose traction check the wiring and connections to the sensors sometimes debris hits the wire and loosens the connection if looks ok and light is on have car scanned for the trouble code most auto stores such as auto zone/advanced auto offer this service for free the code will what and where the problem is so repair can be made

Jul 18, 2010 | 2000 Mazda 626

2 Answers

Mazda 626 2000 - warning lights for ABS, TCS


what u do to stop the vehicle and remove the battery head and refix,if the problem still persits go for thorough scanning.

Mar 25, 2010 | 2002 Mazda 626

Not finding what you are looking for?
2002 Hyundai Santa Fe Logo

Related Topics:

655 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...