Question about 2006 Pontiac Montana SV6

1 Answer

2005 Pontiac SV6 Montana key fob unlocks doors but will not lock

2005 Pontiac Montana SV6 Van . In addition Sliding side doors will not lock with the key fob

Posted by on

  • 10 more comments 
  • Anonymous Mar 13, 2014

    right side sliding door on 2005 chevy uplander will not work

  • Anonymous Mar 14, 2014

    I just bought the car and it came with a key fob. it locks and unlocks the doors but the light don't flash and the horn doesn't honk. I also noticed the antitheft light on the stereo doesn't flash is something disconnected? how do I fix it?

  • Anonymous Mar 14, 2014

    I just bought the car and it came with a key fob. it locks and unlocks the doors but the lights don't flash and the horn doesn't honk. I also noticed the antitheft light on the stereo doesn't flash. is something disconnected? how do I fix this?

  • Anonymous Mar 17, 2014

    doors will not unlock with key fob

  • Anonymous Mar 18, 2014

    disable automatic door locks pontiac montana 2006

  • Anonymous Mar 18, 2014

    fues digram for 2005 Pontatic Montana van

  • Anonymous Mar 20, 2014

    door will only unlock from inside manually

  • Anonymous Mar 20, 2014

    door will only unlock and open from inside usint the lock manually

  • Anonymous Mar 20, 2014

    locking and unlocking when driving and when parked

  • Anonymous Mar 27, 2014

    Doors won't unlock with key fob and won't lock either after manually unlocking.

  • Anonymous Mar 28, 2014

    WITH FOB OR SWITCH

  • Anonymous Apr 01, 2014

    how can I replace just for door locks and alarm but like to replace ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.

Posted on Feb 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why are side sliding doors difficult to open and close without using the button?


The door tracks are greased at the factory . By now, the grease in the tracks of your 2005 Montana has disappeared or become contaminated. Also, the rollers have become contaminated with dirt. Cleaning and regreasing of both tracks and rollers should result in a marked improvement.

Nov 19, 2015 | 2005 Pontiac Montana SV6

1 Answer

Buttons don't work to open rear passenger door


You need to be more clearer with your question...not sure what you mean by "hand wire comes outside van"??? also not sure what you mean by "get buttons to open door" are you talking about the sliding side doors on your 2006 Montana.if so clean off the contacts they are located on the door post also on the door itself..hope this helps

Sep 29, 2014 | 2006 Pontiac Montana SV6

1 Answer

2008 Pontiac Montana S6 Won't Start.


Sounds like the anti-theft/alarm system was triggered.
Have you tried locking and unlocking the driver door with the key to disable the alarm ?
And you need at least 12 volts to crank the engine so the battery may need to be charged up first.

Feb 24, 2014 | 2006 Pontiac Montana SV6

1 Answer

How to program key fob on 06 Montana SV6 without tech 2


There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote.

Nov 05, 2012 | 2006 Pontiac Montana SV6

1 Answer

2005 pontiac sv6 door alarm chimes all the time. how can I disable or bypass the chime?


On my '07 Montana SV6 was the same problem, I've fix it by moving up to 3 mm. contact plate at the body frame of the rihgt sliding door. If you check the spots on the plate where pins from the door comes to this plate, you will see that they contacting not in a middle. There are two ways to fix: move down pin unit in the door or move up contact plate on frame. For me second way was better. It's manufacture mistake comes sinse 2005 and on right door only.

May 24, 2011 | 2006 Pontiac Montana SV6

1 Answer

Bought a used 2005 pontiac montana today. Keyless remotes have a mind of their own even after replacing batteries. will lock the car but not unlock and won't open sliding side door. Please help


does your vehicle have an owners manual in it?? sometimes you hafta re-program the remote, to function correctly with the vehicle, and the owners manual will tell you what you need to do.

Dec 05, 2010 | 2005 Pontiac Montana SV6

1 Answer

How do i program a keyless entry remote on an 05 pontiac montana


Hello, this can only be done with a GM tech 2 scan tool.


  1. Install a scan tool.
  2. Use the scan tool in order to access programming: Vehicle Control System/Computer Integrating System/Module Setup/BCM/Program Key Fobs.
  3. Press the START soft key on the scan tool.
  4. Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of 5-10 seconds, the scan tool will indicate that the transmitter is programmed.
  5. Repeat the previous step in order to program up to 4 transmitters.
  6. Remove the scan tool.
  7. Operate the transmitter functions in order to verify correct system operation.

Nov 07, 2010 | 2005 Pontiac Montana SV6

1 Answer

Pontiac Montana SV6


For instructions on how to program remotes and keys check website below, I use these and they are usually very accurate. This website does state that on your vehicle, special equipment is needed to program a key fob, as there is no onboard programming for it. However, there are programming instructions for transponder keys.
http://www.programautokeys.com/

http://www.programautokeys.com/

Feb 15, 2010 | Pontiac Montana SV6 Cars & Trucks

3 Answers

Fuse panel 20005 sv6


Open the passenger front door, look down on the side of dash, there is a panel with a notch in it! It's hard to do, but pull the access panel off, and behind this is the fuse panel. I was looking for the fuse for the doors to fix my key FOB and that's where I found it. Hope that helps! Anthony G.

Mar 28, 2009 | 2005 Pontiac Montana SV6

6 Answers

Where is the bcm program fuse on a 2005 pontiac montana sv6


The BCM program fuse on a 2005 Montanna SV6 is called something different in the manual. It's called a “Keyless Entry Module” fuse and it is fuse #7. The fuse panel is located on the passenger side on the side of the dash. There is a cover with an indent hole in it to pull the fuse cover off. It's really hard to pull it off and it almost seems like your going to break it when your trying to get if off. Keep pulling, it will come off! On the fuse cover, fuse #7 is labeled " RFA MDLS" which is again different than what is in the manual. I followed the procedure to reprogram my "Key Fob" and within 45secs, I had reprogrammed my key FOB! I was so excited, because, I have been trying locate the BCM fuse for 4 weeks. I think GMC does not want us to know it’s location or name, so you would have to go into a dealership to get your Key Fobs reprogrammed costing about a $100 for a minute of work.
e65ae06.jpg


1. Keep the windows open as a safety measure, then,
2. Remove the ignition key from the ignition lock cylinder.
3. Remove the “RFA MDLS” (fuse #7 ,BCM PRGRM fuse, Keyless Entry fuse) from the fuse panel.
4. Close all of the doors.
5. Close the liftgate.
6. Turn the ignition lock cylinder to ACC.
7. Turn the ignition lock cylinder to OFF, and then back to ACC within 1 second.
8. Open and close any vehicle door. A chime will be heard when the system enters the BCM programming/diagnostic mode.
9. Press and hold the transmitter LOCK and UNLOCK buttons simultaneously for 14 seconds.
10. Important
After 7 seconds, a chime may be heard confirming successful programming.
11. Repeat the previous step on each additional transmitter to be programmed.
12. Remove the ignition key from the ignition lock cylinder
13. Install the “RFA MDLS” fuse ( fuse #7 ,BCM PRGRM fuse, Keyless Entry fuse) back into the fuse panel.
14. Press on the key fob functions (EG. Lock, Unlock) to verify correct operation.

Mar 17, 2009 | 2006 Pontiac Montana SV6

Not finding what you are looking for?
2006 Pontiac Montana SV6 Logo

1,609 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...