Question about 1999 Chevrolet Tracker

1 Answer

Does the serpentine belt need somekind of lubricant?

Ok, I see the diagram and everything appears to be right however the belt is getting hot.... does it need a lubricant, soap, wd40???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 416 Answers

Belt is getting hot, because it might be loose or one of the components (AC, water pump, alternator etc) has trouble with rotation (getting stuck). In most common case it is alternator.
If you are handy with that you need to remove the belt and rotate the alternator, water pump, ac pulleys and see which one has problem with rotation. Also you can check for free at Autozone if alternator giving enough charge.

Libricants are prohibited to use, belt will be slippering and wont rotate the pulleys for AC, water pump, alternator.

For tension serpentine belt can be checked by twisting it, it should not twist more then 90 degree, or by pushing, no more the 1/4 inch freedom then you push it
Good Luck

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Serpentine belt diagram 2002 Ford escort zx2


The picture is for a zetec. Let me know if wrong diagram?
26017169-0d1su300qx55v1h5u01lpo5r-3-0.jpg

Dec 21, 2015 | Ford Cars & Trucks

1 Answer

Serpentine belt diagram for 2005 nissan frontier


Your Frontier has 2 possible engine sizes, the 2.5L and 4.0. Both diagrams appear below.
Best of luck!
Greg

2005 Nissan Frontier 2.5L Serpentine Belt
greg_margo_26.jpg






2005 Nissan Frontier 4.0L Serpentine Belt

greg_margo_27.jpg

Aug 12, 2011 | Nissan Frontier Cars & Trucks

1 Answer

2007 chrysler sebring serpentine belt diagram


Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.

Jan 31, 2010 | 2007 Chrysler Sebring Sedan

2 Answers

Need serpentine belt routing diagram for 1994 Dodge grand caravan


3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Jan 21, 2010 | 1994 Dodge Grand Caravan

1 Answer

Ok i have taken off my alternator but i cant get the belt off. I need a diagram of how to remove the belt.


There should be a belt diagram under the hood to remove the serpentine belt. You have to compress the tensioner with a breaker bar or a special wrench. Make sure you decompress it in the right direction otherwise you will snap the tensioner.

Dec 03, 2009 | 2001 Mercury Sable

1 Answer

Need a diagram for serpentine belt for a 1997 ford 4.6 liter v8


here is an image of the engine in question (on the right) it is not a diagram but shows the track of the serpentine belt

http://static.howstuffworks.com/gif/1999-2000-2001-2002-2003-2004-ford-mustang-5.jpg


Nov 12, 2009 | 1997 Ford Thunderbird LX

2 Answers

I NEED 2005 mazda6 Serpentine Belt Routing


There are 2 engines for your Mazda 6, a 2.3 and a 3.0. Below are both diagrams:
2.3
e557cdf.jpg

3.0
c9ae9a7.jpg

Sep 08, 2009 | 2004 Mazda 6

2 Answers

Diagram needed


HELLO THERE: Here is a link that will help you out ok dont forget to rate this soultion this helps me out too 1994 buick lesabre serpentine belt removal 1994 buick lesabre serpentine belt removal. Custom made wrestling belts ... money belt zipper. chest injuries from seat belts. serpentine belt diagram 30 mitsubishi ...beltpedia.info/1994-buick-lesabre-serpentine-belt-removal.html

Aug 15, 2009 | 1994 Buick LeSabre

1 Answer

1987 Buick Century 2.5 serpentine belt diagram


call a parts store they usually can provide you the routing for serpantine belts good luck getting it right though it can be tricky pay close attention to how the belt is routed :)

Jun 22, 2009 | 1987 Buick Century

Not finding what you are looking for?
1999 Chevrolet Tracker Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...