Question about 1995 Dodge Ram 2500

2 Answers

1995 dodge ram 2500 will not start

I had a tranny put in my 95 ram and now it will not start i am not getting any spark from the coil so i put a new coil on and it still is not getting any spark

Posted by on

  • kenworth3063 Feb 14, 2009

    found the problem on the 360 motor the crank sensor is on the back of the motor and if not careful when you drop the trany the wirers brake

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You may want to check the auto shot down but first turn the key forward and see if the cheack Engine light is on.

Posted on Mar 12, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 141 Answers

CHECK CRANKSENSOR AND CAM SENSOR IF IT HAS ONE

Posted on Feb 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It mayI have no fire going to the coil or from the coil to the plugs


Have you checked the wiring, the spark @ plug, Power to the coil???

Engine Won't Start No Spark - Auto Diagnosis Repair Help

aa1car.com/library/no_spark.htm
If your engine cranks normally but will not start because it has no spark, or it ... If an engine has a coil-on-plug ignition system with no plug wires, remove one of ...

No-start, No-Spark diagnosing simulated - YouTube

? 5:13
https://www.youtube.com/watch?v=XSWN1M8Hoqo
May 19, 2010 - Uploaded by FrankHurtAuto
Simulation of no start with no spark diagnosing, ... Ignition coiland module test with test light (ScannerDanner Premium lecture) - Duration: ...

getting fire from coil but not to plugs - CarGurus

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusJun 12, 2013 - 2000 dodge ram 1500 4x4 not getting fire changed distributor cap, coil, pickup ignition, rotor, plugs, plug wires 2 answers. ... 1994 dodge 5.9 just shut off and wont start back up there is no spark or fire from coil or plugs. ... 94 dodge van 318 eng will not start new plugs new crank ...

Ignition Coil Troubleshooting: (No) Fire in the Hole

www.secondchancegarage.com/public/coil-troubleshooting.cfm

Jan 27, 2016 | Cars & Trucks

1 Answer

No spark nostart on 1997 maxima with 1998 tranny


did you replace the knock sensor from the old one to the replacement one. ? double check the sensors are the correct ones fitted to your original engine are on the new replacement, also check the connection plugs, sometimes these cannot connect fully if have become weak.

Jul 30, 2017 | 1997 Nissan Maxima

1 Answer

DODGE RAM 1500 4X4 YEAR 1995 AUTOMATIC TRANSMISSION PROBLEM


I don't know what you got going there, but most people would have shot that truck in the head along time ago, you must a lot of patience. 1, 10 to 12 liters is for a complete rebuild, you are only dumping out none, you should not have to ad any oil. Just check it with the dipstick.2 you have 2 oil coolers in the line, how did you manage that? in out in out? 3, Get the thing up there in line with the engine, move it in close, line up the bolt holes, get a couple bolts started, keep the tranny supported, so far so good, put in a cross member while it is still loose, don't tighten anything up yet, you are still aligning, get the flywheel spun around till a bolt lines up, remove 3 or 4 spark plugs and it will spin easier, put in bolt, then spin it around again to the next bolt and put it in, get all of them in before tightening them up, Now you can start tightening up all your bolts, cross members, drive shafts, hook up he shifter, electrics, speedometer, etc. You don't want any oil leaks, do not take out the torque converter, you will upset the seal. If it doesn't start, your neutral safety switch is out of align. You will have to loosen it up and move it just a fraction till the starter clicks on. Don't forget the spark plugs! Hope this helps.

Mar 19, 2010 | 1996 Dodge Ram 1500 Club Cab

1 Answer

No spark,new coil still no spark,crank sensor? 95 dodge ram 5.2 l


Could possibly be the ECM or computer it may be the crank sensor. The crank sensor is probably the cheepest so I would start there. Since it sound like you may be throwing parts at this, since you cant drive it to have a diagnostic done and you can't have the crank sensor tested, I would buy a used one from a junk yard to see if that is the problem to save a little money since you may have to buy somthing else if that does not work. Good luck

Feb 07, 2010 | 1995 Dodge Ram

1 Answer

I have a Dodge 97 4x4 with no spark. Replaced the


Run a wire from the +on the battery to the + on the coil.Then try and start.If it starts the only way you can turn off is to disconect the wire from the battery to the coil.This will tell you have a wireing problem

Dec 27, 2009 | 1997 Dodge Ram

1 Answer

Will a 95 dodge ram tranny interchange with a 2000


No it will not. I have a 95 and am on tranny number 5. I had always put in used ones because I didn't know how long I was going to keep the truck. Now I have so much in it I have to keep it.
Anyway, back to your problem. 94 & 95 are all by themselves. Dodge had alot of problems with trannies in those 2 years and in 96 they attempted to remidy that problem, but didn't quite get the job done. The trannies will look alike until you take a closer look. In 96 they changed the wireing that goes to the computer so these transmissions could not be interchanged. One thing I would reccommend if you do find a used tranny to put in. Buy a brand spanking new torque converter.
BTW I did find one site for used parts that has come in handy several times. Car-Part.com Give it a try and good luck with your project.
I hope this helps you out, if so let us know and don't forget to rate me.
Thanks!

Mar 08, 2009 | 1999 Dodge Ram

1 Answer

Starting


are you getting spark? check the ignition module and crank sensor

May 27, 2008 | 1995 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...