Question about 1997 Chevrolet Cavalier

1 Answer

Changing the wheel studs for '87 Chevy Cavlier

I need to change my wheels studs on my 1987 Chevy Cavalier car. I cannot remove the hub. What is the proper procedure? Thanks in advance for your help.

Posted by on

  • Anonymous Apr 01, 2014

    replace broken front wheel stud

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 49 Answers

Need Tool - Front Hub Spindle Remover
Changing the wheel studs for '87 Chevy Cavlier - 22f87f7.jpg

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Broken wheel studs on a 1987 jeep wrangler


No need to replace the hub just the studs. The come in from the back and are splined to prevent the stud from turning with the nut. Remove the hub --drive out the broken studs and put the new ones in from the rear and drive them back in. Get the studs from the dealer spares or a good tyre retailer.

Apr 08, 2013 | 1987 Jeep Wrangler

1 Answer

1997 2.4 toyota cavlier where exactly on the car is the computer located?


It is inside the right front fender, just in front of the tire (passenger side). You will need to remove the forward wheel well skirt from the fender and front air dam to access. Providing its a Chevy Cavalier rather than the Toyota Cavalier which I'm not familiar with.

Mar 19, 2011 | 1998 Chevrolet Cavalier

3 Answers

How to replace lug nut studs 2002 chevrolet cavalier


take a hammer and a punch and pound it in, it will pop out the back of the hub assembly, then you get your new bolt, slide it through the back, same way the old one came out, throw a few washers on it and use the lug nut to draw it out till it catches, take the lug nut and washers back off, put the tire back on and use a little extra torque on that stud to insure it is all the way in place.

Good Luck!!

Mar 21, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

Front wheel stud replacement for a 2006 Hyundai Sonata GL.


grind a flat spot on the round head of the new stud this should give enough clearance to install it. don't pull the hub this will damage the bearing.

Oct 24, 2009 | 2006 Hyundai Sonata

1 Answer

How to change stud in rear wheel hub assembly. i need to know how to change the stud in the rear wheel hub assembly, and how do i go about taking it apart


Remove tire and wheel, remove caliper and brake rotor. DO NOT apply the brakes while the caliper is loose. Hit stud you want to replace hard with a LARGE HEAVY hammer to drive it out towards vehicle. DO NOT use a light hammer. It will distort the stud and possibly mushroom the end making it very difficult to remove. Once the stud is loose, you may or may not have enough room to get it out of the hole. You may need to pull the hub loose from the rear suspension to gain more room. Remove the stud. Place new stud in hole. Put a stack of washers over the stud, grease the threads, and using a new FLAT nut with the same threads as the lug nut, tighten until the stud is pulled all the way into the hub. Remove the flat nut, reattach the hub assembly (if you needed to take it loose) and reinstall the brakes.


Sep 28, 2009 | 1994 Ford Probe

1 Answer

Sheared front lug


First remove wheel from car. Next take large hammer and drive whats left of lug out, you may need to use a punch if sheared off below hub hight. Now insert new lug stud in from back side of hub and use a open style lug nut (like those you see on old cars without nice wheels) and put on upside down, flat side towards hub. tighten up by hand then use socket to tighten down untill stud is pulled in all the way. In some cases you may need to use a few washes under nut to give enough room for shank on stud.

Sep 09, 2009 | 1993 Pontiac Sunbird

3 Answers

Broken stud on wheel


The studs press out and in. Perhaps a hammer would work. Replacements studs can be purchased. Need to remove hub, of course.

Aug 13, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Master cylinder in my 91 chevy cavlier


It should be located on the drivers side inside the engine compartment on the firewall inline with your steering wheel.


GGBMDB

Dec 08, 2008 | 1991 Chevrolet Cavalier

Not finding what you are looking for?
1997 Chevrolet Cavalier Logo

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...