Question about 2001 Chrysler Voyager
Hi can anyone tell me the location of the interior fuse box on my 2001 voyager, is it still on the drivers side or is tha just for L/H/D models? there is a removable panel but doesnt seem to be a duse box behind it!!!
It is Located left side up under the dash. there should be a removable panel (drivers side) Sit in the seat and kick the left of the panel.....that's it
Posted on Nov 19, 2008
(check water/ antifreeze level first, make sure it's full, low water can cause it not to heat properly) it could possibly be either the thermostat- fairly cheap and easy to fix, great for DIY's- if that doesn't fix it, it could be heater core.
Posted on Dec 06, 2008
This definately sounds like the clutch cycling switch or the low pressure switch is bad. You just simply evacuate the system, screw off the old and screw on the new and then evacuate and recharge the system. This should get you fixed. You might also want to check and make sure that you have enough refirgerant in the system. If there is not enough then this switch will not allow power to flow to the clutch to prevent any damage to the compressor from there not being enough oil in the system.
Posted on Jun 09, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
Tips for a great answer:
Dec 21, 2015 | 1996 Chrysler Town & Country
Sep 27, 2015 | Chrysler Cars & Trucks
Mar 25, 2015 | 2002 Chrysler Voyager
Feb 11, 2015 | 2001 Chrysler Voyager
Mar 06, 2011 | 2003 Chrysler Voyager
Nov 15, 2010 | Chrysler Voyager Cars & Trucks
Jul 19, 2010 | 2001 Chrysler Town & Country
Oct 28, 2009 | 2001 Chrysler Voyager
Nov 17, 2008 | 2001 Chrysler Voyager
Mar 12, 2015 | 2001 Chrysler Voyager
1,924 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: